MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

Help scanning medium format photos
Предыдущая тема :: Следующая тема  


Reply

Hi guys, I've just been given a Yashica D by my friend, and some Kodac Portra 400NC film. Before I buy a scanner, I just want to understand how exactly it will work - from when I take the picture to when I scan it. I'm a bit confused. Can anyone walk me through what I'll need besides the scanner/camera/film (if anything), and what I'll need to do? I've never used film before :$ Thanks!


Reply

I have an Epson V500 flatbed scanner, it has a medium film format adapter.
Simple need to put film into adapter and put onto glass of scanner. After all scanner program do the rest.

This is the results.

http://www.mflenses.com/gallery/v/filmcamera/Voigtlander/BessaRF/

http://www.mflenses.com/gallery/v/filmcamera/yashica_mat_124g/


Reply

Thanks sir! So I just have the film processed and then I scan the negatives?


Reply

Yes.


Reply

The Epson 3170, which can usually be bought for pretty cheap on eBay scans at up to 3200 dpi optical, and comes with film holders for both 35mm and medium format. I've been well pleased with mine.

Best,

Michael


Reply

streetwaves писал(а):
Thanks sir! So I just have the film processed and then I scan the negatives?

That's it. Details are...

Keep your fingerprints off the negs, it's a bugger to clean them.

Put them upside down on the carrier, usually. Some strange hieroglyphic device on the neg carrier will remind you of this Smile

You might find that the focus of the scan will improve if you pack the corners of the carrier by the thickness of a postcard, or less. Some scanners can be slightly out of focus and it's a worthwhile thing to find out about.

You'll initially want to scan at huge resolutions to see what it can do. You'll find out it's unnecessary and something like 2400dpi (or less) is adequate for most purposes.

You might find the supplied software suits you fine, but you might want to try Vuescan or Silverfast - but get in some time with the supplied freeware first.

What I've found so far, is that a flatbed scanner can produce perfectly acceptable results, but you have to be prepared to fiddle around a bit to find the best output technique for your device.