MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

Pentax 645 intermittent problem
Предыдущая тема :: Следующая тема  


Reply

The Pentax 645 I bought appears to have a problem Crying or Very sad

Basically, it appears that in P mode there is a 50% chance that the camera selects the smallest f/stop (f/22) during exposure, even though the camera shows a much larger f/stop in the viewfinder. So, at least 50% of the pictures are badly underexposed (near black). If the camera does not select f/22 all by itself, then the shots are perfectly exposed.

The lens does not seem to be a problem, as all lenses I tried behave the same. So it must be on the body side.

Any ideas? Is there a communication problem between the lenses and the body?


Reply

Are you sure it select f/22 and not a too much high speed ? Sometimes my K100D has this problem (altough the speed on external screen is right) and I got beautiful black shots Confused


Reply

CarbonR писал(а):
Are you sure it select f/22 and not a too much high speed ? Sometimes my K100D has this problem (altough the speed on external screen is right) and I got beautiful black shots Confused


No, I actually made a few self portraits to see the diaphragm close, and I saw that it closed completely.


Reply

Mmmmm... are you speaking when the diaphragm ring is in the "A" position right? Are you sure it's correctly fixed in that position? Have you tried with other Pentax 645 lens?


Reply

My suspicion is along those lines - the mount sensor for aperture setting may be sticky on the camera, or otherwise unable to sense the lens is set to A instead of f/22.

Erm. Replace "sticky" by "bad electrical contact",,, Try cleaning the contacts on the camera mount - as the problem occurs on multiple lenses, unless they all are dirty in the same way, it's probably the camera.


Reply

Thanks! Yes, the lenses are in "A".

I'll try to clean the contacts and report back my findings.