| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
robar
 Зарегистрирован: 25.03.2007 Сообщения: 90 Откуда: Dallas area, Texas
|
 Отправлено: Пн Авг 27, 2007 5:46 pm Заголовок сообщения: Cleaning the glass |
|
 Отправлено: Пн Авг 27, 2007 5:46 pm Заголовок сообщения: Cleaning the glass |
|
|
robar wrote:
i've got a tamron SP 2x teleconverter. it had haze that did not look like fungus. i dismantled it and i've got all the glass clean and clear except for one lens. this lens is still foggy after several tries at cleaning with alcohol and acetone. it seems like the glass itself is foggy. does anyone know what the problem is? _________________ Roy
http://www.texasbostons.com/
http://picasaweb.google.com/roysphoto |
|
| Наверх |
|
 |
LucisPictor
 Зарегистрирован: 26.02.2007 Сообщения: 17633 Откуда: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Отправлено: Пн Авг 27, 2007 7:05 pm Заголовок сообщения: |
|
 Отправлено: Пн Авг 27, 2007 7:05 pm Заголовок сообщения: |
|
|
LucisPictor wrote:
Hi!
I have talked to a vendor and shop owner I know, a very nice guy whom I really trust (he never tries to talk you into buying a lens, he gives honest advice).
He told me that mostly "haze" is water that has condensed at the surface of a glass inside the lens after it has been exposed to humidity.
He said, this wouldn't harm the lens at all (which really surprised me, since I thought it would cause immediate fungus) it just would reduce the contrast a little which would not be too bad if you shoot digitally.
When I asked him about possible fungus, he said that it could cause fungus but that it needed "some years" as long as the lens is not exposed to humidity and darkness again.
He also said that this kind of "misty" haze can easily be wiped away.
"Fungus" almost always showed some filaments, he said.
If you are not able to wipe it away, he also said, it would not simply be microscopic drops of water, but something that has permeated into the glass surface (very rare) or the coating.
This might be a consequence of fungus or might have another reason, it is not reversible, but again it does not influence the performance badly, unless it really turned the lens milky.
His final advice was to shoot with the lens and see if you can live with the results and and only do some cleaning if you are not satisfied and if you know what you are doing. The older a lens, he laughed, the easier it is to open it and get to the glass.
I guess, this does not help you a lot, I'm afraid, but it perhaps it consoles you a little...  _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| Наверх |
|
 |
Attila
 Зарегистрирован: 24.02.2007 Сообщения: 58002
Expire: 2025-11-18
|
 Отправлено: Пн Авг 27, 2007 7:06 pm Заголовок сообщения: |
|
 Отправлено: Пн Авг 27, 2007 7:06 pm Заголовок сообщения: |
|
|
Attila wrote:
Yes I know I met sometimes glass is damaged you can't remove with any liquid. Perhaps a good try to bring the lens to an optician might be they are gently remove damaged surface. Try first with a cheap lens glass and look the result. |
|
| Наверх |
|
 |
bob955i
 Зарегистрирован: 15.04.2007 Сообщения: 2495
|
 Отправлено: Пн Авг 27, 2007 7:21 pm Заголовок сообщения: |
|
 Отправлено: Пн Авг 27, 2007 7:21 pm Заголовок сообщения: |
|
|
bob955i wrote:
I got a lens with a cloudy rear element that proved to be down to separation so I gently heated the element until it completely separated and then cleaned the balsam off. I then tentatively re-assembled the lens without re-cementing the elements - you can see Newton rings at certain angles but I intend to use the lens like this to see if the aberrations pose any problems in practice. If they do, I'll re-cement the parts.
The only thing I would say here is that the coating (where applicable) on the internal surfaces of lens elements sometimes isn't as durable as that on the outside so watch what you clean with should you decide to have a go.
Последний раз редактировалось bob955i Пн Авг 27, 2007 7:23 pm; всего правок: 1 |
|
| Наверх |
|
 |
Orio
Зарегистрирован: 24.02.2007 Сообщения: 29545 Откуда: West Emilia
Expire: 2012-12-04
|
 Отправлено: Пн Авг 27, 2007 7:21 pm Заголовок сообщения: |
|
 Отправлено: Пн Авг 27, 2007 7:21 pm Заголовок сообщения: |
|
|
Orio wrote:
| LucisPictor писал(а): |
Hi!
I have talked to a vendor and shop owner I know |
From my little experience, what your vendor says sounds absolutely true. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Наверх |
|
 |
robar
 Зарегистрирован: 25.03.2007 Сообщения: 90 Откуда: Dallas area, Texas
|
 Отправлено: Пн Авг 27, 2007 7:22 pm Заголовок сообщения: |
|
 Отправлено: Пн Авг 27, 2007 7:22 pm Заголовок сообщения: |
|
|
robar wrote:
this is not water. taking the lens apart is a breeze, easy.
this is like either the glass or the coating is milky.
lucis, could you ask him if there is a way to remove the coating.
TIA _________________ Roy
http://www.texasbostons.com/
http://picasaweb.google.com/roysphoto |
|
| Наверх |
|
 |
Attila
 Зарегистрирован: 24.02.2007 Сообщения: 58002
Expire: 2025-11-18
|
 Отправлено: Пн Авг 27, 2007 7:23 pm Заголовок сообщения: |
|
 Отправлено: Пн Авг 27, 2007 7:23 pm Заголовок сообщения: |
|
|
Attila wrote:
Good idea! Thanks for sharing! |
|
| Наверх |
|
 |
Orio
Зарегистрирован: 24.02.2007 Сообщения: 29545 Откуда: West Emilia
Expire: 2012-12-04
|
 Отправлено: Пн Авг 27, 2007 7:44 pm Заголовок сообщения: |
|
 Отправлено: Пн Авг 27, 2007 7:44 pm Заголовок сообщения: |
|
|
Orio wrote:
| robar писал(а): |
this is not water. taking the lens apart is a breeze, easy.
this is like either the glass or the coating is milky.
lucis, could you ask him if there is a way to remove the coating.
TIA |
Have you looked close with a magnifying glass?
Sometimes what looks like milky haze is really very tiny tiny scratches, caused by some cleaning instrument. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Наверх |
|
 |
LucisPictor
 Зарегистрирован: 26.02.2007 Сообщения: 17633 Откуда: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Отправлено: Пн Авг 27, 2007 8:49 pm Заголовок сообщения: |
|
 Отправлено: Пн Авг 27, 2007 8:49 pm Заголовок сообщения: |
|
|
LucisPictor wrote:
Next time, I talk to him I will ask, but I think that removing a coating will really damage the glass.
Orio mentioned a good point. The milky impression might derive from a vast number of tiny scratches... _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| Наверх |
|
 |
robar
 Зарегистрирован: 25.03.2007 Сообщения: 90 Откуда: Dallas area, Texas
|
 Отправлено: Пн Авг 27, 2007 9:14 pm Заголовок сообщения: |
|
 Отправлено: Пн Авг 27, 2007 9:14 pm Заголовок сообщения: |
|
|
robar wrote:
i checked. there's no cleaning marks. this is a totally enclosed internal lens.
roy _________________ Roy
http://www.texasbostons.com/
http://picasaweb.google.com/roysphoto |
|
| Наверх |
|
 |
LucisPictor
 Зарегистрирован: 26.02.2007 Сообщения: 17633 Откуда: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Отправлено: Вт Авг 28, 2007 7:57 am Заголовок сообщения: |
|
 Отправлено: Вт Авг 28, 2007 7:57 am Заголовок сообщения: |
|
|
LucisPictor wrote:
OK, next thing that comes to my mind is that this is an element consisting of two lenses. These lenses are "glued" together with a special material and perhaps this glue has turned milky. _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| Наверх |
|
 |
Orio
Зарегистрирован: 24.02.2007 Сообщения: 29545 Откуда: West Emilia
Expire: 2012-12-04
|
 Отправлено: Вт Авг 28, 2007 8:59 am Заголовок сообщения: |
|
 Отправлено: Вт Авг 28, 2007 8:59 am Заголовок сообщения: |
|
|
Orio wrote:
| robar писал(а): |
i checked. there's no cleaning marks. this is a totally enclosed internal lens.
roy |
The fact that it's an inner element is not a sufficient circumstance to exclude the possibility. I have a lens which has what looks like milky haze on an inner element. Looking with a MG, the milky haze shows like many very tiny scratches. Evidently a previous owner has opened the lens and energically cleaned to remove something (fungus?) _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Наверх |
|
 |
robar
 Зарегистрирован: 25.03.2007 Сообщения: 90 Откуда: Dallas area, Texas
|
 Отправлено: Пн Сен 03, 2007 7:54 pm Заголовок сообщения: |
|
 Отправлено: Пн Сен 03, 2007 7:54 pm Заголовок сообщения: |
|
|
robar wrote:
this problem is the lens itself.
somebody is mailing me some cerium oxide to polish it with. hopefully i can do it evenly.
here's a temp fix and it works. ESPECIALLY on my polycarbonite eye glasses. just about any kind of wax will work.
I have a suggestion you might consider. Try spraying the etched
glass with "Lemon Pledge" and very lightly polish it off. An oculist
many years ago recommended that to me in lieu of the various (usually
unsuccessful) resin coatings touted to fill tiny scratches and other
surface imperfections on eyeglasses. He said that he used it
routinely on fine optical surfaces. I have been using it on my
eyeglasses regularly for perhaps 20 years and on filters for the last
several years. If it doesn't fix the problem, it washes off with
soap and water or isopropyl alcohol and you haven't risked anything. _________________ Roy
http://www.texasbostons.com/
http://picasaweb.google.com/roysphoto |
|
| Наверх |
|
 |
Attila
 Зарегистрирован: 24.02.2007 Сообщения: 58002
Expire: 2025-11-18
|
 Отправлено: Пн Сен 03, 2007 8:26 pm Заголовок сообщения: |
|
 Отправлено: Пн Сен 03, 2007 8:26 pm Заголовок сообщения: |
|
|
Attila wrote:
Sound interesting I will try on my cheap damaged glasses.We have other furniture polish products here hopefully they do the job well. Let's try. |
|
| Наверх |
|
 |
robar
 Зарегистрирован: 25.03.2007 Сообщения: 90 Откуда: Dallas area, Texas
|
 Отправлено: Ср Сен 05, 2007 8:43 pm Заголовок сообщения: |
|
 Отправлено: Ср Сен 05, 2007 8:43 pm Заголовок сообщения: |
|
|
robar wrote:
i don't think i'll be trying to fix this lens. i just made another deal of the century. someone told me not to bother with it and he'd send me another for cost of post. he's a collector and said he had about 20 of them. i asked if by any chance he had a 140F 1.4x and a 200F 2x. he did and i picked them up for $90usd. both of these are matched TCs for the 300.
the 01F 2x is fairly common and is not the mathed TC. the 200F 2x is IMPOSSIBLE!! to find and a better match. i think there were under 3000 made and production ended in '84. the 140F 1.4x is still available but costly when one does emerge. i must be living right. _________________ Roy
http://www.texasbostons.com/
http://picasaweb.google.com/roysphoto |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|