MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

big mistake x 2
Предыдущая тема :: Следующая тема  


Reply

I was spooling a roll of TMAX 400 and cut off at a diagonal 1/3 of the last
shot. Mad So I cropped it square when I scanned it, but used a cotton ball
to dob at water drops on the neg when drying:


Voigtlander Bessa RF Skopar 6x9

This is pushed to 1600 using HC-110B @ 7.5 minutes, 20C

And yes, more buckle marks, too, but the film was expired 2002, very stiff and curly, and a total B to load on the reel.


Reply

yeah never use anything hairy
How do you like the TMax 400? I love the detail it provides. Some people think it's weak in the blacks but in my opinion there is nothing that you can not work on while printing - and no postwork can give you back detail if it's not there on the film.


Reply

LOL, yes, this is part of the fun with film developing: everyone must make every bone headed mistake at least once, either that or turn into a protocol driven automaton. I'm not a cookboook type of cook, so I gotta make the experiments.

There was the time soon after I re-started developing I developed not one but TWO rolls of film in Kodak wetting agent. That bottle and the bottle of T-Max I was using looked the same.

I've also done the cut too soon thing. And the shatter the film in the camera thing. And the get hair on it bit... which given the number of cats and dogs in our house, is remarkable any bit remains un-hairy at all.

---

On the wash end, I'm a believer in the Ilford Wash Method, though I read it on an Ilford info sheet differently than I see most people quoting it. So far works well enough (probably Tmax needs longer wash like it needs longer fix)... My approximate sequence:
fill tank, invert, empty
fill tank, 5x invert, fill, 10x, fill, 15x, fill, 1x, fill, 15x... that seemed to fit my interpretation of the Ilford sheet.
Back in the 70's I used a Paterson Force Washer, which is a hose you attach to the faucet on one end and the center tube of the tank on the other.

I wash using tap water, but the last step is to fill the tank with filtered water, a couple of drops of wetting agent, dunk the reel up and down a few times to get the wetting agent mixed in, and let sit a while. Through experimentation, seems letting the wetting agent breathe a bit is a good thing.
I get the film out of the reel - and haven't yet found the best way:
sometimes I do the old fashioned between finger squeegie
sometimes I dunk a real film squeegie in the wetting agent water and then squeegie the film
sometimes I just let the film hang as is, without the squeegies.

Seems like this last method works fine most of the time; the squeegie can leave lines/minor scratches, and the finger method: forgettaboutit.


Reply

Orio and Jussi, thanks! Wink

I've tried the Ilford method, too, but this time I just let the water run
into the tank for 30 minutes and emptied it out 3-4 times during that
period, then the 1 minute wetting agent with distilled water: no water
spots this time, just buckle marks and cotton hairs. Laughing

Here's another from the same roll, warehouse boys doing the brown
paper snake dance:


Bessa RF 6x9 Skopar

Orio, I like TMAX 400, will be ordering more of it.


Reply

Good tonal rendition, contrast well controlled. Not too grainy. Success I'd say. I find the forced crop on 1st one makes it stronger, probably not relevant elements were in the missing part. Never ever touch a wet film unless it's absolutely necessary. Most of everything you can think of will stick, often permanently. Marks (if not scratched) and hair can be usually removed from the base rewashing the film, but everything stuck on the emulsion will be there forever. I've had success cleaning the back of the film with optic cleaner, removes fingerprints and drying marks and evaporates fast (rub very gently with microfiber cloth). Also specific cleaning products can be found. However in many cases dust and hair can be spotted in digital PP or on the print with traditional methods. My method to avoid scratches and drying marks is just to do a final wash in demineralized water and wetting agent, then I drip the reel with a sharp move before opening it.
Finally I hang the film in the drying cabinet hopefully safe from everything. Residual marks are usually minimal.
That said I admit I also had my share of problems and mistakes. Yes, I cut the film across the frame too, I let it slip out of my hands when still wet and land on the floor to pick up everything was lying there (not much, but enough to disturb) and much more I don't even want to think about.

Cheers, Marty.


Reply

Bessa RF Skopar!!!!! Wow, you really make her sing there!


Reply

Hi katastrofo -

I can not see any sign of using cotton! Smile

just kidding .. lol

sorry for this hoax Smile

I just haven't done a few more reflections
(over the lamps in the left corner and over the guy in the left)



tf


Reply

Orio писал(а):
yeah never use anything hairy

Laughing Laughing Laughing Laughing


Reply

martinsmith99 писал(а):
Orio писал(а):
yeah never use anything hairy

Laughing Laughing Laughing Laughing


... on photographs! Wink


Reply

Marty, thanks, the idea about draining the reel with sharp movement is
a good one (during final rinse).

Jussi, yeah, I'm really liking this camera! (Thanks, Attila, even if you don't
like black and white! lol)

TF, thanks much for the heavy lifting on this photo, I will have to finish it now. Smile
and here it is, meatball surgery:



Martin and Orio, yeah, I liked that comment, too! Laughing


Последний раз редактировалось Katastrofo Пт Янв 01, 2010 3:29 am; всего правок: 1


Reply

Orio писал(а):
martinsmith99 писал(а):
Orio писал(а):
yeah never use anything hairy

Laughing Laughing Laughing Laughing


... on photographs! Wink


Hey! Nothing wrong at ALL with hardwood floors! Wink Very Happy