MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

Super Ikonta A 531 question
Предыдущая тема :: Следующая тема  


Reply

Just got this little beauty:




Nice one, eh? But I want to clean the lens behind the front element (and possibly also the focusing thread). I have no idea how to reach the front element... It appears that there are three holes around the serrated front lens, with small set screws underneath. Do I need to remove them to reach the front lens? Yes, of course I will mark infinity and all, but I'd like to ask here just in case.



Reply

What a beauty! Can I ask how much you got it for?

As for the front element, there definitely is an infinity stop somewhere that you need to remove in order to unscrew it, my gues is it's under the ring held in place by the little screws. They are probably grub screws that can be just unscrewed but left in place.

Mine is just a guess, so take it with a grain of salt. Smile

Edit: maybe the ring itself has a dent inside and acts as infinity stop.


Reply

Thanks Ludoo! I think you are right, but at the moment I lack the right small flat screwdrivers. I thought I had one small enough but alas... So it will take a little more time Smile

I need to be careful though. There's some gears inside to couple the wedge on the arm to the lens. Nice system, more reliable than those moving mirrors.

Do you see those white spots on the black paint on top of the camera (near the leather handle)? The paint is not rubbed off there, it's just a reflection of the window.

How much I paid for it? You know what a 55mm f/1.8 SMC Takumar is worth? Pocket change, that sort of money... Smile


Reply

Spotmatic писал(а):
Thanks Ludoo! I think you are right, but at the moment I lack the right small flat screwdrivers. I thought I had one small enough but alas... So it will take a little more time Smile


Get a set of high quality jeweller's screwdrivers, they'll cost a few tens of euros but will be worth their price in gold: a small slip with the screwdriver, or worse a stripped screw, will be very hard or impossible to fix.

Цитата:
How much I paid for it? You know what a 55mm f/1.8 SMC Takumar is worth? Pocket change, that sort of money... Smile


Oh God... Smile

If you stumble on another one and don't need it for yourself, shoot me a PM. Smile


Reply

You might also try asking Hans Kerensky, I don't think he's a member here but he works a lot on folders, is a very nice guy, and lives in your same country. Smile

Other people you might ask: Rick Oleson (member here), and Mike Elek (Zeissfan on RFF).


Reply

Ah, I know Hans Kerensky but I have never actually met him. I exchanged some PM's with him about the Wester Super-S2 6x6 folder camera I had (but sold to a happy Frenchman).

Thanks for the other information! You are very helpful Smile


Reply

Spotmatic писал(а):
Ah, I know Hans Kerensky but I have never actually met him. I exchanged some PM's with him about the Wester Super-S2 6x6 folder camera I had (but sold to a happy Frenchman).

Thanks for the other information! You are very helpful Smile


Hello Ludoo and Peter,

Just saw this posting and joined the forum.

Peter, that Super Ikonta surely still looks very good. Did you manage to clean the middle lens element ? If not you must have a look at this webpage were the lens/shutter of a KMZ Moskwa is shown during a repair. The Moskva mechanism very much looks like that on your Super Ikonta.If you want i can send you also some photos of my Moskva shutter repair which show how to remove the frontlens.

www3.telus.net/public/rpnchbck/Moskva5


Последний раз редактировалось hanskerensky Вс Апр 11, 2010 5:48 am; всего правок: 1


Reply

Congrats!! Seems your folder collection is still growing Wink


Reply

Had the same problem on the bessa, since those unsealed optics pumps a lot of dirt inside with the "aid" of bellows folding-unfolding movements.
Being afraid to move the focus calibration on the front element I removed the whole lens assembly with the original MFlenses spanner wrench, Mr. Green I unscrewed the rear element and cleaned the front by opening the iris and locking the shutter in B with a cable release.

On your lens this may vary a little.


Just my two cents.


Reply

hanskerensky писал(а):
Spotmatic писал(а):
Ah, I know Hans Kerensky but I have never actually met him. I exchanged some PM's with him about the Wester Super-S2 6x6 folder camera I had (but sold to a happy Frenchman).

Thanks for the other information! You are very helpful Smile


Hello Ludoo and Peter,

Just saw this posting and joined the forum.

Peter, that Super Ikonta surely still looks very good. Did you manage to clean the middle lens element ? If not you must have a look at this webpage were the lens/shutter of a KMZ Moskwa is shown during a repair. The Moskva mechanism very much looks like that on your Super Ikonta.If you want i can send you also some photos of my Moskva shutter repair which show how to remove the frontlens.

www3.telus.net/public/rpnchbck/Moskva5


Hans, thanks for joining this forum Smile

I haven't tried to clean it yet, because I discovered that my screwdriver set was not small enough. So I have ordered a smaller set.

That link picturing the Moskva repair is very extensive, I think that's enough information, thank you for offering to send me photos of your Moskva repair. If these are digital then maybe posting them here is a good idea too?

Again, thank you very much!


Reply

I have one of this too, even in the same nice state. (I would say they are both like new.) Even with the leather case. Problem with mine it has the scale in feet, no meters. And I wish it would have a shoe for attaching a small flash.
Not finished my first roll, I'm curious of the results.

Eugen


Reply

Thanks for bringing this topic back to my attention, Eugen!

By now I have been able to remove the front lens element; this was easier than I thought. I tried to clean the focusing helicoid and that worked, but the focusing is still a little stiff after re-attaching the front lens ring (the focusing is done with a lever on a moving ring on the lens standard; the front lens ring has a slot that fits over the lever). I'll have another look soon!

In the meantime I also found a nice example of the Zeiss Mess-Ikonta 524/16 (the one with non-coupled rangefinder and Zeiss-Opton Tessar lens). I expect to receive it today. Folders can be and are still fun!


Reply

Spotmatic писал(а):
In the meantime I also found a nice example of the Zeiss Mess-Ikonta 524/16 (the one with non-coupled rangefinder and Zeiss-Opton Tessar lens). I expect to receive it today. Folders can be and are still fun!


It is a very nice folder, I have an identical one in mint condition (it belonged to my grandfather).

Photos taken with it: http://www.flickr.com/photos/mureena/tags/52416/

Photo of it: