| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
Michele
Зарегистрирован: 02.09.2010 Сообщения: 10
|
 Отправлено: Чт Сен 02, 2010 2:17 pm Заголовок сообщения: Clean Exa II |
|
 Отправлено: Чт Сен 02, 2010 2:17 pm Заголовок сообщения: Clean Exa II |
|
|
Michele wrote:
Hi to all, this is the first time that I write on this board, but It's been a long time that I read the board stealing your suggestion
Well, I need help whit my Exa II that was of my grandfather, but it is dirty whit a lot of dust, maybe fungus ecc, It needs to be clean! I started to disassembly but i can't remove top cover! Someone has a disassembly guide/manual or can give me some instructions? I put some pictures of the camera. thanks!!
 |
|
| Наверх |
|
 |
kansalliskala
 Зарегистрирован: 19.07.2007 Сообщения: 5122 Откуда: Southern Finland countryside
Expire: 2016-12-30
|
 Отправлено: Чт Сен 02, 2010 2:22 pm Заголовок сообщения: Re: Clean Exa II |
|
 Отправлено: Чт Сен 02, 2010 2:22 pm Заголовок сообщения: Re: Clean Exa II |
|
|
kansalliskala wrote:
| Michele писал(а): |
Hi to all, this is the first time that I write on this board, but It's been a long time that I read the board stealing your suggestion
Well, I need help whit my Exa II that was of my grandfather, but it is dirty whit a lot of dust, maybe fungus ecc, It needs to be clean! I started to disassembly but i can't remove top cover! Someone has a disassembly guide/manual or can give me some instructions? I put some pictures of the camera. thanks!!
 |
_________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| Наверх |
|
 |
Gonzoo
 Зарегистрирован: 29.03.2010 Сообщения: 231
|
 Отправлено: Сб Сен 04, 2010 6:57 pm Заголовок сообщения: |
|
 Отправлено: Сб Сен 04, 2010 6:57 pm Заголовок сообщения: |
|
|
Gonzoo wrote:
Hi Michele,
one year ago I had exactly the same problem. You may refer to this thread: http://www.dslr-forum.de/showthread.php?t=538843&page=2 if you read german. There are some photos taken by me showing the solution of the problem.
I can provide you with the repair manual if needed (its german though). Afaik you have to remove the timer dail and the film rewind dail to remove the top cover. Therefore you have to remove two screws that are inside the film spools.
Hope this helps... if you need further assistance, just let me know. _________________ Canon 5d | Exa 500 | Pentacon Six + too much lenses  |
|
| Наверх |
|
 |
Michele
Зарегистрирован: 02.09.2010 Сообщения: 10
|
 Отправлено: Чт Сен 16, 2010 2:54 pm Заголовок сообщения: |
|
 Отправлено: Чт Сен 16, 2010 2:54 pm Заголовок сообщения: |
|
|
Michele wrote:
many thanks for your answer! I don't read german, sorry! I have removed the two dail and the screws but I can't remove the top cover, I don't now why. I would be grateful if you could give me assistance or manual! |
|
| Наверх |
|
 |
Gonzoo
 Зарегистрирован: 29.03.2010 Сообщения: 231
|
 Отправлено: Вт Сен 21, 2010 6:39 am Заголовок сообщения: |
|
 Отправлено: Вт Сен 21, 2010 6:39 am Заголовок сообщения: |
|
|
Gonzoo wrote:
Michele, can you provide us with some photos of your progress with the camera? _________________ Canon 5d | Exa 500 | Pentacon Six + too much lenses  |
|
| Наверх |
|
 |
Michele
Зарегистрирован: 02.09.2010 Сообщения: 10
|
|
| Наверх |
|
 |
Gonzoo
 Зарегистрирован: 29.03.2010 Сообщения: 231
|
 Отправлено: Чт Окт 28, 2010 9:13 am Заголовок сообщения: |
|
 Отправлено: Чт Окт 28, 2010 9:13 am Заголовок сообщения: |
|
|
Gonzoo wrote:
Michele,
in the first of your pictures you see the time dail. Since it is still in place, you cannot remove the top cover. Here is how to remove it:
- set the dail to B (take care not to turn it to another time during removal)
- use two screwdrivers (or any other tool of your choice) to remove the snap-ring in the center of the time dail (around the hole)
- take the black spacer plate off
- this might reveal some screws, remove them
Cheers
Ehm _________________ Canon 5d | Exa 500 | Pentacon Six + too much lenses  |
|
| Наверх |
|
 |
Michele
Зарегистрирован: 02.09.2010 Сообщения: 10
|
 Отправлено: Пн Ноя 08, 2010 12:13 pm Заголовок сообщения: |
|
 Отправлено: Пн Ноя 08, 2010 12:13 pm Заголовок сообщения: |
|
|
Michele wrote:
Done!! Thank you very very much my friend!!! |
|
| Наверх |
|
 |
Minolfan
 Зарегистрирован: 30.12.2008 Сообщения: 3451 Откуда: Netherlands
|
 Отправлено: Ср Ноя 10, 2010 9:34 am Заголовок сообщения: |
|
 Отправлено: Ср Ноя 10, 2010 9:34 am Заголовок сообщения: |
|
|
Minolfan wrote:
I hope it will be a succes. I got a Exa IIa last week. Not superb, but quite reasonable condition with Jena T 50mm 2.8.
The shutter still moves, but doesn't work properly, the curtains move together most times. They still looks OK and tight. So the little thing need a good cleaning too.
So I am very curious about the results of the cleaning. Good luck!
I would be happy if I could find a repair manual in English, German, French or Dutch. Anyone? |
|
| Наверх |
|
 |
Gonzoo
 Зарегистрирован: 29.03.2010 Сообщения: 231
|
 Отправлено: Пн Дек 06, 2010 4:25 pm Заголовок сообщения: |
|
 Отправлено: Пн Дек 06, 2010 4:25 pm Заголовок сообщения: |
|
|
Gonzoo wrote:
http://www.ihagee.org/RepairSpare/repairspare.htm _________________ Canon 5d | Exa 500 | Pentacon Six + too much lenses  |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|