| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
montecarlo
 Зарегистрирован: 04.04.2007 Сообщения: 1865 Откуда: Romania
|
 Отправлено: Чт Июл 03, 2008 10:34 am Заголовок сообщения: About bellows |
|
 Отправлено: Чт Июл 03, 2008 10:34 am Заголовок сообщения: About bellows |
|
|
montecarlo wrote:
Hello all,
Inspired by poilu's setup and its results http://forum.mflenses.com/reala-snapshots-t8318,start,15.html#69845 I would like to di the same because I have some 500 old slides and no one in the city it scannig slides. So the cheapest method would be this.
I've got a scanner, but its only for documents and I don't have enough money for a good , performant scanner.
What are the thing I sould look or ask when I buy a bellow ? Can I , using a bellow to "scan" an entire slide even if the camera is an APS-C sensor one (by moving the slide foward and backward) ?
Thank you . _________________ Canonet QL17 III
Zenit E , Helios-44 58mm f:2.0 , Tair-11A 135mm f:2.8, Jupiter-9 85mm f:2.0,
Carl Zeiss Jena Flektogon 35mm f:2.4
Pentax MX, ME Super, Chinon CE4/CM4, Petri MC 28mm f:2, smc Pentax-M 50mm f:1.7, Soligor T 135mm f:2.8
Minolta X500, Tokina 28/2.8, Rokkor 50/1.7, 80-205/4.5
Nikon D90, Nikkor 35/2.0, Nikkor 50/1.8, Sigma 24/2.8, Nikkor 18-105 VR |
|
| Наверх |
|
 |
Orio
Зарегистрирован: 24.02.2007 Сообщения: 29545 Откуда: West Emilia
Expire: 2012-12-04
|
 Отправлено: Чт Июл 03, 2008 12:15 pm Заголовок сообщения: |
|
 Отправлено: Чт Июл 03, 2008 12:15 pm Заголовок сообщения: |
|
|
Orio wrote:
Cosmin,
a couple of years ago, I bought from Ebay a M42 pentax bellows with included an industar-61L and slide copier. Look for this kind of deals. If I remember well I paid less than 40 Euros for the whole thing (bellows+slide copier unit+industar) _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Наверх |
|
 |
poilu
 Зарегистрирован: 26.08.2007 Сообщения: 10476 Откуда: Greece
Expire: 2019-08-29
|
 Отправлено: Чт Июл 03, 2008 6:23 pm Заголовок сообщения: |
|
 Отправлено: Чт Июл 03, 2008 6:23 pm Заголовок сообщения: |
|
|
poilu wrote:
| Cosmin писал(а): |
| Can I , using a bellow to "scan" an entire slide even if the camera is an APS-C sensor one (by moving the slide foward and backward) ? |
If you use a APS, the slide have to be more away and the lens more near the cam than for full frame.
Some bellow doesn't allow enough movement, if you look at my setup you will see a wooden stick that I use to move the slide more away.
I cannot advice you which bellow allow the more movement and it is difficult to evaluate it on a photography. _________________ T* |
|
| Наверх |
|
 |
soikka
 Зарегистрирован: 11.06.2008 Сообщения: 534 Откуда: Finland
|
 Отправлено: Чт Июл 03, 2008 8:28 pm Заголовок сообщения: |
|
 Отправлено: Чт Июл 03, 2008 8:28 pm Заголовок сообщения: |
|
|
soikka wrote:
| poilu писал(а): |
| Cosmin писал(а): |
| Can I , using a bellow to "scan" an entire slide even if the camera is an APS-C sensor one (by moving the slide foward and backward) ? |
If you use a APS, the slide have to be more away and the lens more near the cam than for full frame.
Some bellow doesn't allow enough movement, if you look at my setup you will see a wooden stick that I use to move the slide more away.
I cannot advice you which bellow allow the more movement and it is difficult to evaluate it on a photography. |
I use different focal length to compensate for the wooden stick. With about 75mm you get the whole frame copied even with APS-C sensor. I use a Pentax K-mount Auto-bellows and its slide copier, it doesn't allow enough movement for ~50mm lens on an APS-C camera, but with M75-150@75mm it's fine. _________________ DSLR: K-5,K20d+Grip, Ist*Ds
Film: MZ-5n, LX, MX+winder, SuperA+winder, ME Super,
M-series: 28/2.8, 35/2, 40/2.8, 135/3.5, 75-150/4, A-series: 50/1.7, Super-Taks: 55/1.8, 105/2.8, S-M-C Taks: 28/3.5, 50/1.4, 85/1.8, Sigma SW2 24/2.8, Tamron SPs: 90/2.5(I), 180/2.5, 500/8, Rikenon XR 35-70/3.5, Cosinon 40/2.5, F-1.7x AF-adapter, Olympus XA |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|