| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
PaulC
 Зарегистрирован: 23.12.2008 Сообщения: 2318
|
 Отправлено: Ср Дек 08, 2010 11:52 am Заголовок сообщения: CA problem - expert advice please |
|
 Отправлено: Ср Дек 08, 2010 11:52 am Заголовок сообщения: CA problem - expert advice please |
|
|
PaulC wrote:
I have a friend who is asking about fringing on a defective efs 17-55mm f.28 IS USM. She sent it back to the company for replacement and they now say they have repaired it and want to send it back. Here is the problem:
"I wish it had just been my high expectations. Unfortunately, it was also showing up at the f10+ range - even at 14 and 16. If there's anything white: shirt collars, whiteboard isolations (with no lighting on the white board and in the shade!), and absolutely anything and everything with a sky in it. The worst was when one green leaf overlapped another green leaf, and there was fringing along the edge of the front leaf.
Quite honestly the CA was far far worse than on my crappy 18-55mm kit lens. And so much that it made the lens impractical because post processing to fix the problems was too lengthy.
I'd checked it out with the other photogs because I wasn't sure myself, and there was agreement (based on the images shown) that it was a duff copy."
She wants to know:
A) could a lens like this have something wrong with it that needs a straightforward repair, or does it have to be replaced?
B) If a repairable fault could cause this, what would need to be done to put it right, so she can ask the shop what they did to it and find out if they are just messing about or might really have fixed it.
It costs her a lot in postage so she doesn't want to get it back and find it needs to be sent back yet again.
Thanks _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Наверх |
|
 |
Orio
Зарегистрирован: 24.02.2007 Сообщения: 29545 Откуда: West Emilia
Expire: 2012-12-04
|
 Отправлено: Ср Дек 08, 2010 3:11 pm Заголовок сообщения: |
|
 Отправлено: Ср Дек 08, 2010 3:11 pm Заголовок сообщения: |
|
|
Orio wrote:
some image samples? _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Наверх |
|
 |
PaulC
 Зарегистрирован: 23.12.2008 Сообщения: 2318
|
 Отправлено: Ср Дек 08, 2010 4:56 pm Заголовок сообщения: |
|
 Отправлено: Ср Дек 08, 2010 4:56 pm Заголовок сообщения: |
|
|
PaulC wrote:
I'll ask her to provide some. _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Наверх |
|
 |
PaulC
 Зарегистрирован: 23.12.2008 Сообщения: 2318
|
|
| Наверх |
|
 |
Sevo
 Зарегистрирован: 22.08.2008 Сообщения: 1189 Откуда: Frankfurt, Germany
Expire: 2012-12-03
|
 Отправлено: Ср Дек 08, 2010 8:21 pm Заголовок сообщения: |
|
 Отправлено: Ср Дек 08, 2010 8:21 pm Заголовок сообщения: |
|
|
Sevo wrote:
Probably a misaligned/poorly centered group. Has the lens ever been dropped, or banged against another in the camera bag? Modern high end AF lenses are very complex, and must use rather delicate mechanics to keep the AF fast and low power - it is easier to throw them out of alignment than an old brass lens. _________________ Sevo |
|
| Наверх |
|
 |
poilu
 Зарегистрирован: 26.08.2007 Сообщения: 10476 Откуда: Greece
Expire: 2019-08-29
|
 Отправлено: Ср Дек 08, 2010 8:26 pm Заголовок сообщения: |
|
 Отправлено: Ср Дек 08, 2010 8:26 pm Заголовок сообщения: |
|
|
poilu wrote:
if those are 100% crop, it is quite good for a Canon _________________ T* |
|
| Наверх |
|
 |
PaulC
 Зарегистрирован: 23.12.2008 Сообщения: 2318
|
 Отправлено: Ср Дек 08, 2010 8:34 pm Заголовок сообщения: |
|
 Отправлено: Ср Дек 08, 2010 8:34 pm Заголовок сообщения: |
|
|
PaulC wrote:
They are 100% crop _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Наверх |
|
 |
Nikos
 Зарегистрирован: 17.05.2010 Сообщения: 1077 Откуда: Greece
Expire: 2015-01-02
|
 Отправлено: Ср Дек 08, 2010 9:06 pm Заголовок сообщения: |
|
 Отправлено: Ср Дек 08, 2010 9:06 pm Заголовок сообщения: |
|
|
Nikos wrote:
| poilu писал(а): |
| if those are 100% crop, it is quite good for a Canon |
This is an expensive lens. Do not compare it with the kit lens.
It it supposed to be the equivalent of the 24-70 for 1.6X crop cameras.
My Canon 24-70 has never produced CA like in the man's collar... _________________ Νίκος • www.diafragma.gr
Cameras: Canon EOS 5D Mark II, Sony α7R, Sony NEX-5N
MF lenses:
SLR:
Canon TS-E 17mm f/4, Zeiss 2.8/21 ZE, Zeiss 2/28 Contax, Zeiss 2/35 ZE, Zeiss 1.4/50 Contax, Zeiss 1.4/85 Contax, Zeiss Makro 2/100 ZE,
Zeiss 2/135 Contax, Zeiss 2.8/135 Contax, Zeiss Vario-Sonnar 35-70 Contax, Zeiss Vario-Sonnar 100-300 Contax, Zeiss F-Distagon Rollei, Canon FD 24mm f2, Minolta MD Rokkor 35mm f2.8
Rangefinder:
Zeiss 4.5/21 C Biogon ZM, Zeiss 2/35 Biogon ZM, Voigtländer 15mm f/4.5 Heliar L39, Leica Tele-Elmarit 2.8/90mm, Zeiss 2/45 Contax G, Zeiss 2.8/90 Contax G, Canon 50mm 1.8 LTM
AF lenses: Canon 15mm f/2.8 Fisheye, Canon 24-70 f/2.8 L, Canon 70-200 f/2.8 L IS II, Canon 70-200 f/4 L, Canon 300 f/4 L IS, Canon 100 f/2.8 macro
|
|
| Наверх |
|
 |
Sevo
 Зарегистрирован: 22.08.2008 Сообщения: 1189 Откуда: Frankfurt, Germany
Expire: 2012-12-03
|
 Отправлено: Ср Дек 08, 2010 9:16 pm Заголовок сообщения: |
|
 Отправлено: Ср Дек 08, 2010 9:16 pm Заголовок сообщения: |
|
|
Sevo wrote:
It is easy to check whether it is due to a symmetric or asymmetric phenomenon (and force will rarely ever create a symmetric defect) - the CA will generally be about as symmetric as its cause. Only design limitations and assembly flaws, sensor artefacts or a (rare) purely axially offset element will create a strictly radially symmetric CA, i.e. matching juxtaposed seams at each corner. _________________ Sevo |
|
| Наверх |
|
 |
Orio
Зарегистрирован: 24.02.2007 Сообщения: 29545 Откуда: West Emilia
Expire: 2012-12-04
|
 Отправлено: Ср Дек 08, 2010 10:09 pm Заголовок сообщения: |
|
 Отправлено: Ср Дек 08, 2010 10:09 pm Заголовок сообщения: |
|
|
Orio wrote:
| poilu писал(а): |
| if those are 100% crop, it is quite good for a Canon |
+1
The lens is not defective, maybe a slightly worse copy of the lens, but overall it's well within the typical CA tolerance of modern Canon autofocus lenses. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Наверх |
|
 |
visualopsins
 Зарегистрирован: 05.03.2009 Сообщения: 11698 Откуда: California
Expire: 2027-07-11
|
 Отправлено: Чт Дек 09, 2010 12:39 am Заголовок сообщения: |
|
 Отправлено: Чт Дек 09, 2010 12:39 am Заголовок сообщения: |
|
|
visualopsins wrote:
I'm no expert, I agree with poilu and Orio, after seeing at a comparison between 18-55 IS and 17-55 IS here (scroll down to middle of page). The 18-55 CA is much worse, but I still see it in 17-55 example. The review also says 'CA in 17-55 is well-controlled'; imho, that means much better controlled than 18-55 (obvious in example), not necessarily in comparison with other lenses. The review also states 'this should be an L-series lens'.
The lens review also says prone to flare. I wonder if a hood would have helped your friend?
If CA in examples was much worse I would say as Sevo did much more eloquent than me there might be misaligned, incorrect(!), or even a reversed element or group.
Given all that, I think the lens is fine, that the "CA" present in photos is due to lens tendency to flare rather than CA.
When your friend asks repair what was done to the lens to 'fix it', expect to hear 'realigned element/group', 'found improperly seated element', 'tightened auto focus mechanism', or something similar. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Наверх |
|
 |
PaulC
 Зарегистрирован: 23.12.2008 Сообщения: 2318
|
 Отправлено: Чт Дек 09, 2010 7:06 am Заголовок сообщения: |
|
 Отправлено: Чт Дек 09, 2010 7:06 am Заголовок сообщения: |
|
|
PaulC wrote:
| nkanellopoulos писал(а): |
| poilu писал(а): |
| if those are 100% crop, it is quite good for a Canon |
This is an expensive lens. Do not compare it with the kit lens.
It it supposed to be the equivalent of the 24-70 for 1.6X crop cameras.
My Canon 24-70 has never produced CA like in the man's collar... |
The 24-70 is one of their best. This one is still 17mm at the wide end and has the design difficulties associated with that, so I think the 17-40 f4L is a better comparison. This sort of result is why my 17-40 f4 rarely sees the light.
I've passed on the main points to her, thanks for the replies. _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|