| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
trifox
 Зарегистрирован: 14.05.2008 Сообщения: 3614 Откуда: UK
Expire: 2014-05-29
|
|
| Наверх |
|
 |
Spotmatic
 Зарегистрирован: 18.08.2008 Сообщения: 4045 Откуда: Netherlands
|
 Отправлено: Пт Мар 25, 2011 10:50 pm Заголовок сообщения: |
|
 Отправлено: Пт Мар 25, 2011 10:50 pm Заголовок сообщения: |
|
|
Spotmatic wrote:
Wow, I did not know a lens needed that much bearing balls. It looks like an infestation!
What's the source of those bearing balls? _________________ Peter - Moderator
Pentax K-5 + Pentax 645 + Canon 5D + Bessa RF 10,5cm Heliar, and a 'little' bag full of MF lenses. The lens list is * here *.
My fast 80s: Asahi-Kogaku Takumar 83mm f/1.9 - Super-Takumar 85mm f/1.9 - FA 77mm f/1.8 Limited - Cyclop 85/1.5 (Helios-40 innards) - Komura 80mm f/1.8 - Meyer Görlitz Primoplan 7,5cm 1:1.9 - Carl Zeiss Jena 80mm f/1.8 Pancolar - Canon 85mm f/1.8 S.S.C. - Canon 85mm f/1.2 S.S.C. Aspherical |
|
| Наверх |
|
 |
trifox
 Зарегистрирован: 14.05.2008 Сообщения: 3614 Откуда: UK
Expire: 2014-05-29
|
 Отправлено: Пт Мар 25, 2011 10:57 pm Заголовок сообщения: |
|
 Отправлено: Пт Мар 25, 2011 10:57 pm Заголовок сообщения: |
|
|
trifox wrote:
The lens has basically two bearing rings - one is inside (broken as seen on pictures)
I think that is not very good idea by Canon - but never mind - I am not a lens engineer
Another bearing mechanism is placed in the mount - that one was OK in this case
My thought - unconfirmed - Someone broke the lens by turning the aperture mechanism - usually people do try to open the aperture on FD lenses and they do not know how to open it. _________________ Flickr.com |
|
| Наверх |
|
 |
Spotmatic
 Зарегистрирован: 18.08.2008 Сообщения: 4045 Откуда: Netherlands
|
 Отправлено: Пт Мар 25, 2011 11:06 pm Заголовок сообщения: |
|
 Отправлено: Пт Мар 25, 2011 11:06 pm Заголовок сообщения: |
|
|
Spotmatic wrote:
Thanks for the explanation - the lenses I've disassembled usually have only one bearing ball for the diaphragm click stops  _________________ Peter - Moderator
Pentax K-5 + Pentax 645 + Canon 5D + Bessa RF 10,5cm Heliar, and a 'little' bag full of MF lenses. The lens list is * here *.
My fast 80s: Asahi-Kogaku Takumar 83mm f/1.9 - Super-Takumar 85mm f/1.9 - FA 77mm f/1.8 Limited - Cyclop 85/1.5 (Helios-40 innards) - Komura 80mm f/1.8 - Meyer Görlitz Primoplan 7,5cm 1:1.9 - Carl Zeiss Jena 80mm f/1.8 Pancolar - Canon 85mm f/1.8 S.S.C. - Canon 85mm f/1.2 S.S.C. Aspherical |
|
| Наверх |
|
 |
trifox
 Зарегистрирован: 14.05.2008 Сообщения: 3614 Откуда: UK
Expire: 2014-05-29
|
 Отправлено: Пт Мар 25, 2011 11:09 pm Заголовок сообщения: |
|
 Отправлено: Пт Мар 25, 2011 11:09 pm Заголовок сообщения: |
|
|
trifox wrote:
and --- gathered balls
tf _________________ Flickr.com |
|
| Наверх |
|
 |
my_photography
 Зарегистрирован: 03.11.2008 Сообщения: 2772 Откуда: Pearl of the Orient
Expire: 2016-12-25
|
 Отправлено: Сб Мар 26, 2011 1:25 am Заголовок сообщения: |
|
 Отправлено: Сб Мар 26, 2011 1:25 am Заголовок сообщения: |
|
|
my_photography wrote:
Wow, they need all those ball bearings for the lens? _________________
Zeiss: CJZ Flektogon 20/2.8, CJZ Flektogon 20/4, , CJZ Pentacon 29/2.8, CJZ Flektogon 35/2.4, CJZ Pancolar 50/1.8, Tessar 50/2.8, Biotar 7.5cm/1.5, CJZ Pancolar 80/1.8, CJZ Sonnar 135/3.5, CJZ Pentacon 135/2.8 CJZ Sonnar 200/2.8
Other Germany: Meyer Primoplan 50/1.8, Meyer Trioplan 100/2.8
Takumar: SMC 50/1.4 Super Tak 55/2, Super Tak 85/1.9, S-M-C 135/3.5, Super Tak 150/4
Russian: Zenith 16/2.8, Mir-24M 2/35, Volna-9 50/2.8, Helios 44M (58/2), Helios 44M-3 MC (58/2), Helios 40 (85/1.5), Tair 11A (135/2.8 )
Others: Sears 28/2.8, Sankor 35/2.8, Enna M�nchen Tele-Ennalyt 135/3.5
Zoom Sigma Zoom 28-85/3.5-4.5
|
|
| Наверх |
|
 |
aleksanderpolo
 Зарегистрирован: 24.01.2010 Сообщения: 684
|
 Отправлено: Сб Мар 26, 2011 6:19 am Заголовок сообщения: |
|
 Отправлено: Сб Мар 26, 2011 6:19 am Заголовок сообщения: |
|
|
aleksanderpolo wrote:
Lifetime supply of bearing balls
So are you going to put the balls where they were originally? Or skip them altogether? The suspense is killing me  |
|
| Наверх |
|
 |
caerwall
 Зарегистрирован: 11.11.2010 Сообщения: 51
|
 Отправлено: Пн Июн 06, 2011 12:42 pm Заголовок сообщения: Canon 100-400 f4.5-5.6 IS Trombone |
|
 Отправлено: Пн Июн 06, 2011 12:42 pm Заголовок сообщения: Canon 100-400 f4.5-5.6 IS Trombone |
|
|
caerwall wrote:
My trombone zoom is a great lens but the mechanism became sticky (jerky) there was a small trace on the barrel which seemed to me that a small piece of grit had gone under the slide.
So genius even found a schematic diagram of the lens and thought that if the slide lock was removed the barrel could simply be cleaned.
Out come four tiny easily removed screws and about 200 micro ball bearings followed quickly thereafter.
Inside the mount there is a horizontally opposed open double ball race one facing in each direction. The barrel fitting is the only thing keeping them in place.
I could not see how anyone could ever manage to fit or replace such small bearings under this circumstance - back to canon for an expensive repair caused by a simple attempt to clean. Someone told me they used magnets to get them in there.
I subsequently found that approximately one in ten of these lenses have that barrel stiction problem. What happens is that the whack of the slide hitting against the non-damped end of the travel can jump one or more bearings out of it's race. This then first gets under the slide and causes that sticky feeling - and the trace mark on the barrel I saw was a sign of this. The bearings can then often travel into the lens body itself and interfere with the IS mechanism as well.
Of course it was out of warranty and I had tried to "clean" it myself ...
So be warned that the 85mm f1.2 is not the only Canon lens with open ball races inside. |
|
| Наверх |
|
 |
dnas
 Зарегистрирован: 14.11.2008 Сообщения: 488 Откуда: Japan
|
 Отправлено: Ср Июн 15, 2011 2:10 am Заголовок сообщения: |
|
 Отправлено: Ср Июн 15, 2011 2:10 am Заголовок сообщения: |
|
|
dnas wrote:
A lot of Canon FD lenses have those ball bearings..... I am usually very reluctant to disassemble the rear of these lenses, because it's difficult to put all of those back in the right place!!!!! |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|