| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
8310
 Зарегистрирован: 05.06.2010 Сообщения: 123
|
 Отправлено: Пт Май 27, 2011 9:19 pm Заголовок сообщения: Contax Planar 1,4/50 AE disassembly? |
|
 Отправлено: Пт Май 27, 2011 9:19 pm Заголовок сообщения: Contax Planar 1,4/50 AE disassembly? |
|
|
8310 wrote:
I tried searching but could not find anything, so there you go:
I got ahold of a Contax Planar 50/1,4 AE that needs some relubing but so far I have not been able to disassemble it. After removing the front ring and the screws that hold the focus ring I can just move the focus ring but not remove it. Its inner diameter is too small to just take it off over the front.
As you can maybe understand, this lens is not exactly a doorstopper and does have some value, so I am inclined to get some more information before proceeding to experiment and just disassemble any parts that can be disassembled.
Any advice on the disassembly? Has anyone ever serviced this lens? Is there maybe even some sort of service manual anywhere out there? |
|
| Наверх |
|
 |
Himself
 Зарегистрирован: 01.03.2007 Сообщения: 3315 Откуда: Montreal
Expire: 2013-05-30
|
 Отправлено: Пт Май 27, 2011 9:35 pm Заголовок сообщения: |
|
 Отправлено: Пт Май 27, 2011 9:35 pm Заголовок сообщения: |
|
|
Himself wrote:
No advice.
I wouldn't experiment on this one. And I do fixed quite a few lenses.
Now, your chances to sell that lens here, or any other Contax 50/1.4 are close to zero.
If you are in US of A look for a thread opened by BigDawg, he praises a certain shop but I don't remember where. _________________ Moderator Himself |
|
| Наверх |
|
 |
BRunner
 Зарегистрирован: 29.07.2009 Сообщения: 705 Откуда: Czech Republic
|
 Отправлено: Сб Май 28, 2011 11:56 am Заголовок сообщения: |
|
 Отправлено: Сб Май 28, 2011 11:56 am Заголовок сообщения: |
|
|
BRunner wrote:
It's MMJ version, but hope it helps.
Overhaul of Contax Planar 1.4/50mm T* MMJ _________________ .: APO-Maniac :. |
|
| Наверх |
|
 |
8310
 Зарегистрирован: 05.06.2010 Сообщения: 123
|
 Отправлено: Ср Июн 01, 2011 3:56 pm Заголовок сообщения: |
|
 Отправлено: Ср Июн 01, 2011 3:56 pm Заголовок сообщения: |
|
|
8310 wrote:
Yes, that did help indeed. I was not aware that the focusing ring and the ring to fix the focusing ring can be separated. Problem solved, thanks.  |
|
| Наверх |
|
 |
qtmonster
Зарегистрирован: 15.06.2011 Сообщения: 37 Откуда: Singapore
|
 Отправлено: Ср Июн 15, 2011 2:57 pm Заголовок сообщения: |
|
 Отправлено: Ср Июн 15, 2011 2:57 pm Заголовок сообщения: |
|
|
qtmonster wrote:
Hi 8310,
May I know how did you in the end manage to disassemble this lens?
I also have this particular version (AEJ I think), and I'm trying to relube the focus ring and also remove the aperture ball bearing (de-click it), but there are no screws on the back mount.
Let me know thanks!  |
|
| Наверх |
|
 |
8310
 Зарегистрирован: 05.06.2010 Сообщения: 123
|
 Отправлено: Сб Июн 18, 2011 8:11 pm Заголовок сообщения: |
|
 Отправлено: Сб Июн 18, 2011 8:11 pm Заголовок сообщения: |
|
|
8310 wrote:
I just had some time to finish reassembling it, so that is what I did. I cannot comment on the aperture ball bearing as I only relubed the helicoid.
Some lens parts were slightly different from the MM version linked above, but apart from only having front access and having to put the rear part back on earlier when assembling, the procedure is essentially the same. |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|