| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
cooltouch
 Зарегистрирован: 15.01.2009 Сообщения: 9096 Откуда: Houston, Texas
|
 Отправлено: Ср Июн 29, 2011 6:44 pm Заголовок сообщения: Removing Battery Corrosion |
|
 Отправлено: Ср Июн 29, 2011 6:44 pm Заголовок сообщения: Removing Battery Corrosion |
|
|
cooltouch wrote:
I have obtained a motor drive with a battery pack that had batteries left in it too long. I think they were NiCads that leaked, but don't hold me to that. The corrosion sure looks the same as if it were done by regular batteries.
I vaguely recall recipes for removing corrosion -- like vinegar or baking soda? Using an old toothbrush?
So, just wondering if you might know a tried-and-true method for getting rid of it. It's pretty heavy in a couple of spots. Out of four electrical contacts, only one has any corrosion on it. I don't think I'll have to dismantle the pack to see if corrosion has wicked up the contact's wire -- at least I hope I won't. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Наверх |
|
 |
ludoo
 Зарегистрирован: 18.09.2009 Сообщения: 1397 Откуда: Milan, Italy
Expire: 2011-12-05
|
 Отправлено: Ср Июн 29, 2011 6:56 pm Заголовок сообщения: |
|
 Отправлено: Ср Июн 29, 2011 6:56 pm Заголовок сообщения: |
|
|
ludoo wrote:
I use sanding paper on the contacts  _________________ My galleries
Digital: Samsung EX-1
Past Digital: Samsung NX10, Sigma SD9, Sigma SD10, SD14, DP2, Pentax *istD, Kx, Fuji S2 Pro, Canon 5D
Analog: packfilm Polaroids, 6x9 Kodak folders, Pentacon Taxona half-frame, Fujica ST605n, Walz Envoy, Olympus 35 S-II, Olympus Wide S
Past Analog: Polaroid 600se, Polaroid 110B, Canon IIF, various fixed-lens and Russian rangefinders, ...
Past Lenses: Nikkor 24/2.8, Nikkor SC 50/1.4, Nikkor 50/2, Nikkor H 85/1.8, Nikkor P 105/2.5, Nikkor Q 135/3.5, Fujinon 100/2.8, Fujinon EBC 100/2.8, Fujinon EBC 135/3.5, Fujinon EBC 200/4.5, Mamiya SX 135/2.8, CZJ Flektogon 35/2.4, CZJ Pancolar 50/1.8 zebra, CZJ Sonnar 135/3.5, ...
altroformato
|
|
| Наверх |
|
 |
RioRico
 Зарегистрирован: 12.03.2010 Сообщения: 1120 Откуда: California or Guatemala or somewhere
|
 Отправлено: Ср Июн 29, 2011 7:14 pm Заголовок сообщения: Re: Removing Battery Corrosion |
|
 Отправлено: Ср Июн 29, 2011 7:14 pm Заголовок сообщения: Re: Removing Battery Corrosion |
|
|
RioRico wrote:
| cooltouch писал(а): |
| I vaguely recall recipes for removing corrosion -- like vinegar or baking soda? Using an old toothbrush? |
That is what works for me. BS & H20, then vinegar. Scrub-a-dub-dub. _________________ Too many film+digi cams+lenses, oh my -- Pentax K20D, K-1000, M42s, more
The simple truth is this: There are no neutral photographs. --F-Stop Fitzgerald |
|
| Наверх |
|
 |
iangreenhalgh1
 Зарегистрирован: 18.03.2011 Сообщения: 15679
Expire: 2014-01-07
|
 Отправлено: Ср Июн 29, 2011 8:41 pm Заголовок сообщения: |
|
 Отправлено: Ср Июн 29, 2011 8:41 pm Заголовок сообщения: |
|
|
iangreenhalgh1 wrote:
Isopropyl alcohol to clean it up then a quick rub with fine emery paper to ensure electrical contact. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Наверх |
|
 |
Attila
 Зарегистрирован: 24.02.2007 Сообщения: 58002
Expire: 2025-11-18
|
 Отправлено: Ср Июн 29, 2011 9:17 pm Заголовок сообщения: |
|
 Отправлено: Ср Июн 29, 2011 9:17 pm Заголовок сообщения: |
|
|
Attila wrote:
First vinegar it will be remove green stuff second step is very fine sand paper if vinegar wasn't enough. |
|
| Наверх |
|
 |
cooltouch
 Зарегистрирован: 15.01.2009 Сообщения: 9096 Откуда: Houston, Texas
|
 Отправлено: Ср Июн 29, 2011 10:30 pm Заголовок сообщения: |
|
 Отправлено: Ср Июн 29, 2011 10:30 pm Заголовок сообщения: |
|
|
cooltouch wrote:
Thanks, guys. I posted this same message at a local forum, and one fellow suggested Coke or Pepsi. Well that got me intrigued, and I figured any carbonated soda-type beverage would work, so I used some Mountain Dew. Wow, it worked great! Poured a little on the corrosion and it foamed and bubbled and I was able to just wipe away most of it. There was some heavier scale that I was able to remove easily with a knife. So, all taken care of. Sort of.
After putting the battery holders back into the pack, I checked for voltage across its contacts where it hooks up to the drive. No voltage. Grrr... So, I guess there was some corrosion that wicked up that one contact's wire. I'll probably have to open it up and replace that wire before I'll be able to get it to work. Oh well, I can't complain. I didn't pay anything for it. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Наверх |
|
 |
OM
 Зарегистрирован: 15.01.2010 Сообщения: 166 Откуда: Southern England
|
 Отправлено: Ср Июн 29, 2011 10:53 pm Заголовок сообщения: |
|
 Отправлено: Ср Июн 29, 2011 10:53 pm Заголовок сообщения: |
|
|
OM wrote:
| Attila писал(а): |
| First vinegar it will be remove green stuff second step is very fine sand paper if vinegar wasn't enough. |
That's how I do it - I use the white distilled vinegar.
Vodka is clear for a reason  |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|