| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
Mos6502
 Зарегистрирован: 20.06.2011 Сообщения: 960 Откуда: Austin
|
|
| Наверх |
|
 |
Katastrofo
 Зарегистрирован: 26.02.2007 Сообщения: 10405 Откуда: USA
Expire: 2013-11-19
|
|
| Наверх |
|
 |
Mos6502
 Зарегистрирован: 20.06.2011 Сообщения: 960 Откуда: Austin
|
 Отправлено: Вт Сен 06, 2011 12:14 am Заголовок сообщения: |
|
 Отправлено: Вт Сен 06, 2011 12:14 am Заголовок сообщения: |
|
|
Mos6502 wrote:
I don't think the Cintar is patterned after the Elmar. The Elmar has four elements, and the Cintar is a classic cooke triplet. Further the Elmar has the stop between the two front elements, and the Cintar in keeping with other triplets has the stop between the center and rear element.
I did get some flare when shooting towards the sun but that is to be expected. The older C3's which don't have a recessed front element seem to be a lot more prone to flare (for obvious reasons I guess). But the more shade the better, you'll probably find the hood helps. Hoods help a lot on my other single-coated/uncoated lenses. |
|
| Наверх |
|
 |
Katastrofo
 Зарегистрирован: 26.02.2007 Сообщения: 10405 Откуда: USA
Expire: 2013-11-19
|
 Отправлено: Вт Сен 06, 2011 4:43 am Заголовок сообщения: |
|
 Отправлено: Вт Сен 06, 2011 4:43 am Заголовок сообщения: |
|
|
Katastrofo wrote:
Yes, I'm mistaken, and do agree the Cintar is a Cooke triplet. This source
led me astray:
http://www.shutterbug.com/content/argus-cameras-american-firm-made-miniature-photography-affordable-page-2
Under the Personal Observations heading
I'm happy with the rendering of this lens, but of course it didn't have near
the QC of Leitz. |
|
| Наверх |
|
 |
luisalegria
 Зарегистрирован: 07.03.2008 Сообщения: 6602 Откуда: San Francisco, USA
Expire: 2018-01-18
|
 Отправлено: Вт Сен 06, 2011 5:19 am Заголовок сообщения: |
|
 Отправлено: Вт Сен 06, 2011 5:19 am Заголовок сообщения: |
|
|
luisalegria wrote:
I am intrigued by this point re the Cintar lens.
I have a spare Cintar that is badly fungused. I will take it apart to clean it, so I will have a look at the construction. It should be easy enough to tell if the rear cell has a single element or a cemented pair. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Наверх |
|
 |
martinsmith99
 Зарегистрирован: 31.08.2008 Сообщения: 7029 Откуда: S Glos, UK
Expire: 2013-11-18
|
 Отправлено: Вт Сен 06, 2011 6:03 am Заголовок сообщения: |
|
 Отправлено: Вт Сен 06, 2011 6:03 am Заголовок сообщения: |
|
|
martinsmith99 wrote:
It looks like a bit of swirly bokeh going on in one of those pics. _________________ Casual attendance these days |
|
| Наверх |
|
 |
Mos6502
 Зарегистрирован: 20.06.2011 Сообщения: 960 Откуда: Austin
|
 Отправлено: Вт Сен 06, 2011 11:21 am Заголовок сообщения: |
|
 Отправлено: Вт Сен 06, 2011 11:21 am Заголовок сообщения: |
|
|
Mos6502 wrote:
Some do swirl a bit. Katastrofo's seems swirlier than mine. I'll see if I can get some wide open shots next time I run a roll through. The C3 was known to vignette at f3.5, especially on the early models - but it's a fault in the shutter design rather than with the lens that causes this. That is that the shutter opening is too small, f3.5 barely works - and there's a reason nobody ever made a 2.8 for the C3.
Of course back in 1939 f3.5 was still considered really fast. Funny how quickly things changed. |
|
| Наверх |
|
 |
Scheimpflug
 Зарегистрирован: 06.02.2010 Сообщения: 1888 Откуда: New Zealand / USA
Expire: 2011-11-18
|
 Отправлено: Вт Сен 06, 2011 5:49 pm Заголовок сообщения: Re: Argus C3 Standard test roll |
|
 Отправлено: Вт Сен 06, 2011 5:49 pm Заголовок сообщения: Re: Argus C3 Standard test roll |
|
|
Scheimpflug wrote:
| Mos6502 писал(а): |
| After attempting to adjust the rangefinder (which did not believe anything could be more than 15' away) I went and shot a test roll. The focus is still off by about 6" but I could not reign it in anymore than that no matter how much I fiddled with the rangefinder. |
Before adjusting the rangefinder, did you check that the lens was indexed correctly with the gear on the front? It is possible that someone took the lens off, then put it back on without aligning the gear mechanism.
Instructions are on page 20 of the manual:
http://www.butkus.org/chinon/argus/argus_c-3/argus_c-3.htm _________________ Sigma DP1, Nikon D40 (hers ), Polaroid x530, Pentax P30t, Pentax P50, (P30t/P50 K-A to Nikon F body mount conversion)
Nikon: 18-55/3.5-5.6 "G ED II DX" (F) Soligor: 28/2.8 (FL->F converted), 135/3.5 (F), 3x TC (F, modified) Kalimar: 28-85/3.5 (F)
Vivitar: 70-210/2.8-4.0 Version 3 (F), Tele 500/6.3 Preset (F), 19/3.8 (F) Minolta: 300/5.6 (SR/MC/MD pending F conversion)
Tamron: 28/2.8 (Adaptall) Panagor: 28/2.5 (FD) Aetna: 300/5.6 (F) Osawa: MC 28/2.8 (F)
Vintage Lenses: Dallmeyer: 1940s A.M. 14in 356mm f4 (ULF->M42) 1930s Adon Telephoto Taylor, Taylor & Hobson: 1880s Rapid Rectilinear 8 1/2 x 6 1/2 11.31in f/8 (LF->?)
Parts Lenses: Nikon 35-135/3.5-4.5 (F), Sigma 70-210/4.5 (F), Nikon 50/1.8 Series E (F) |
|
| Наверх |
|
 |
Mos6502
 Зарегистрирован: 20.06.2011 Сообщения: 960 Откуда: Austin
|
 Отправлено: Вт Сен 06, 2011 6:22 pm Заголовок сообщения: |
|
 Отправлено: Вт Сен 06, 2011 6:22 pm Заголовок сообщения: |
|
|
Mos6502 wrote:
The lens goes through the full 180 degrees. The rangefinder was just out of adjustment.
Interestingly they designed a new rangefinder for the '58 revamp - but I guess it goes out of adjustment just like the older version does. And annoyingly it also offers a magnified view which makes it harder to use than the old version.
I would have rather Argus had their engineers put in a bigger viewfinder... |
|
| Наверх |
|
 |
Scheimpflug
 Зарегистрирован: 06.02.2010 Сообщения: 1888 Откуда: New Zealand / USA
Expire: 2011-11-18
|
 Отправлено: Вт Сен 06, 2011 6:54 pm Заголовок сообщения: |
|
 Отправлено: Вт Сен 06, 2011 6:54 pm Заголовок сообщения: |
|
|
Scheimpflug wrote:
| Mos6502 писал(а): |
| The lens goes through the full 180 degrees. The rangefinder was just out of adjustment. |
Going through the full 180 degrees doesn't guarantee that it is correct, as it is only the lens gear teeth that limit the movement. The rangefinder wheel will turn past infinity as well as past the bottom end of the scale, so having the gears indexed incorrectly won't necessarily limit the travel. When you turn the lens until it stops, does the rangefinder wheel stop exactly at the infinity mark? _________________ Sigma DP1, Nikon D40 (hers ), Polaroid x530, Pentax P30t, Pentax P50, (P30t/P50 K-A to Nikon F body mount conversion)
Nikon: 18-55/3.5-5.6 "G ED II DX" (F) Soligor: 28/2.8 (FL->F converted), 135/3.5 (F), 3x TC (F, modified) Kalimar: 28-85/3.5 (F)
Vivitar: 70-210/2.8-4.0 Version 3 (F), Tele 500/6.3 Preset (F), 19/3.8 (F) Minolta: 300/5.6 (SR/MC/MD pending F conversion)
Tamron: 28/2.8 (Adaptall) Panagor: 28/2.5 (FD) Aetna: 300/5.6 (F) Osawa: MC 28/2.8 (F)
Vintage Lenses: Dallmeyer: 1940s A.M. 14in 356mm f4 (ULF->M42) 1930s Adon Telephoto Taylor, Taylor & Hobson: 1880s Rapid Rectilinear 8 1/2 x 6 1/2 11.31in f/8 (LF->?)
Parts Lenses: Nikon 35-135/3.5-4.5 (F), Sigma 70-210/4.5 (F), Nikon 50/1.8 Series E (F) |
|
| Наверх |
|
 |
Mos6502
 Зарегистрирован: 20.06.2011 Сообщения: 960 Откуда: Austin
|
 Отправлено: Вт Сен 06, 2011 7:30 pm Заголовок сообщения: |
|
 Отправлено: Вт Сен 06, 2011 7:30 pm Заголовок сообщения: |
|
|
Mos6502 wrote:
Yes. But when the rangefinder indicated a distance of 15' for the mountains in the distance, I concluded the rangefinder was out of adjustment.  |
|
| Наверх |
|
 |
Scheimpflug
 Зарегистрирован: 06.02.2010 Сообщения: 1888 Откуда: New Zealand / USA
Expire: 2011-11-18
|
 Отправлено: Вт Сен 06, 2011 8:00 pm Заголовок сообщения: |
|
 Отправлено: Вт Сен 06, 2011 8:00 pm Заголовок сообщения: |
|
|
Scheimpflug wrote:
Ahh, Gotcha.  _________________ Sigma DP1, Nikon D40 (hers ), Polaroid x530, Pentax P30t, Pentax P50, (P30t/P50 K-A to Nikon F body mount conversion)
Nikon: 18-55/3.5-5.6 "G ED II DX" (F) Soligor: 28/2.8 (FL->F converted), 135/3.5 (F), 3x TC (F, modified) Kalimar: 28-85/3.5 (F)
Vivitar: 70-210/2.8-4.0 Version 3 (F), Tele 500/6.3 Preset (F), 19/3.8 (F) Minolta: 300/5.6 (SR/MC/MD pending F conversion)
Tamron: 28/2.8 (Adaptall) Panagor: 28/2.5 (FD) Aetna: 300/5.6 (F) Osawa: MC 28/2.8 (F)
Vintage Lenses: Dallmeyer: 1940s A.M. 14in 356mm f4 (ULF->M42) 1930s Adon Telephoto Taylor, Taylor & Hobson: 1880s Rapid Rectilinear 8 1/2 x 6 1/2 11.31in f/8 (LF->?)
Parts Lenses: Nikon 35-135/3.5-4.5 (F), Sigma 70-210/4.5 (F), Nikon 50/1.8 Series E (F) |
|
| Наверх |
|
 |
Mos6502
 Зарегистрирован: 20.06.2011 Сообщения: 960 Откуда: Austin
|
 Отправлено: Чт Сен 08, 2011 1:45 pm Заголовок сообщения: |
|
 Отправлено: Чт Сен 08, 2011 1:45 pm Заголовок сообщения: |
|
|
Mos6502 wrote:
Or the mountains could have been really close. In retrospect I should have walked the 15 feet to find out.  |
|
| Наверх |
|
 |
LucisPictor
 Зарегистрирован: 26.02.2007 Сообщения: 17633 Откуда: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Отправлено: Чт Сен 08, 2011 2:43 pm Заголовок сообщения: |
|
 Отправлено: Чт Сен 08, 2011 2:43 pm Заголовок сообщения: |
|
|
LucisPictor wrote:
Good photos and nice film processing, decent lab.
I wish our local one would be as good. _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| Наверх |
|
 |
Mos6502
 Зарегистрирован: 20.06.2011 Сообщения: 960 Откуда: Austin
|
 Отправлено: Чт Сен 08, 2011 3:14 pm Заголовок сообщения: |
|
 Отправлено: Чт Сен 08, 2011 3:14 pm Заголовок сообщения: |
|
|
Mos6502 wrote:
| LucisPictor писал(а): |
Good photos and nice film processing, decent lab.
I wish our local one would be as good. |
It's hard to find a good lab these days. I go here instead of the one literally across the street from my house because they do a much better job.
It seems to me like the newer machines make crummier prints. |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|