 Отправлено: Пн Окт 31, 2011 3:55 pm Заголовок сообщения: |
|
 Отправлено: Пн Окт 31, 2011 3:55 pm Заголовок сообщения: |
|
|
SXR_Mark wrote:
The length of the thread for c-mount is specified to be 3.8 mm (0.15-inch?). Since the c-mount register is 17.526 mm and the m4/3 register is 20.0mm, ANY c-mount lens, when correctly mounted, will have the start of the threaded mount 13.726 mm from the sensor. Usefully, this means you can check whether the lens will reach infinity focus by measuring the amount by which the c-mount thread protrudes from sensor side of the adaptor. From memory, there should be a mm or so protrusion for infinity focus.
I do not know if there is also a specification on how much the last optical element may protrude past the rear of the thread, but the few lenses I have seen either do not protrude at all or have very little protrusion. Since the protrusion would have to be pretty large (~10mm?) to get anyway near the shutter plane, there is evidently little or no risk of a c-mount lens protruding far enough into the camera to cause damage. _________________ Olympus OM-D E-M1 for everything |