| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
jclaude
Зарегистрирован: 14.09.2011 Сообщения: 28 Откуда: Toulouse France
|
 Отправлено: Ср Ноя 16, 2011 7:47 am Заголовок сообщения: Stuck aperture |
|
 Отправлено: Ср Ноя 16, 2011 7:47 am Заголовок сообщения: Stuck aperture |
|
|
jclaude wrote:
I'm currently trying to fix the stuck aperture of an Hanimex 135mm, lighter gaz seems to be of limited effect, does someone try to use WD40 for that, or any other liquid?
I fear to completely unassemble the blades!
Thanks
Jean Claude |
|
| Наверх |
|
 |
Excalibur
 Зарегистрирован: 19.07.2009 Сообщения: 5018 Откуда: UK
Expire: 2014-04-21
|
 Отправлено: Ср Ноя 16, 2011 8:42 am Заголовок сообщения: Re: Stuck aperture |
|
 Отправлено: Ср Ноя 16, 2011 8:42 am Заголовок сообщения: Re: Stuck aperture |
|
|
Excalibur wrote:
| jclaude писал(а): |
I'm currently trying to fix the stuck aperture of an Hanimex 135mm, lighter gaz seems to be of limited effect, does someone try to use WD40 for that, or any other liquid?
I fear to completely unassemble the blades!
Thanks
Jean Claude |
Well I wouldn't go beyond lighter fuel for a quick fix, if that doesn't work then it's not always necessary to take the blades apart but just clean the the whole assembly in:- well some say hot soapy water others say lighter fuel. _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent.
Последний раз редактировалось Excalibur Ср Ноя 16, 2011 8:55 am; всего правок: 1 |
|
| Наверх |
|
 |
peterqd
 Зарегистрирован: 28.02.2007 Сообщения: 7449 Откуда: near High Wycombe, UK
Expire: 2014-01-04
|
 Отправлено: Ср Ноя 16, 2011 8:46 am Заголовок сообщения: |
|
 Отправлено: Ср Ноя 16, 2011 8:46 am Заголовок сообщения: |
|
|
peterqd wrote:
Hello J-C
Never, EVER, use WD40!! It might have a good effect to begin with, but after a short time the blades will become totally stuck. This have been learned through bitter experience!
The blades need to be completely clean and dry. Keep applying the lighter fuel and working the blades at the same time and use a cool hairdryer to dry them. It requires a lot of time and patience!
If you can see how to remove the complete aperture assembly without dismantling it, to work on the other side, that might have some success.
Sometmes the springs which activate the blades and the mechanism can become stretched and weak. Also the mechanism might need cleaning/lubrication. Either of these can affect the speed of the blade movement too.
Remember - patience is the word!  _________________ Peter - Moderator |
|
| Наверх |
|
 |
ZoneV
 Зарегистрирован: 09.11.2009 Сообщения: 1633 Откуда: Germany
Expire: 2011-12-02
|
 Отправлено: Ср Ноя 16, 2011 10:02 am Заголовок сообщения: |
|
 Отправлено: Ср Ноя 16, 2011 10:02 am Заголовок сообщения: |
|
|
ZoneV wrote:
I use sometimes WD 40 - but only if screws are corroded that I can not open them. For the application I use cotton swapy - don´t even think about using the spray.
And after I open the screws I have to clean very much to get all WD 40 away.
To use WD 40 without planning to open all seems very difficult, it spreads around!
For stuck or slow iris blades I use isopropanol alcohol. Iris need no grease or oil! _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| Наверх |
|
 |
jclaude
Зарегистрирован: 14.09.2011 Сообщения: 28 Откуда: Toulouse France
|
 Отправлено: Ср Ноя 16, 2011 9:00 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 16, 2011 9:00 pm Заголовок сообщения: |
|
|
jclaude wrote:
Thanks all for your replies, I will avoid WD40 and continue with lighter fuel, some more time!
Jean Claude |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|