MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

Ilford 50 ISO in San Francisco
Предыдущая тема :: Следующая тема  


Reply

Took two rolls on Ilford 50 ISO a couple weeks ago. Both were the same setup: Pentax K1000 and SAMYANG 18-28mm. Having never used the Samyang on a film camera, I was curious. So of note, the EXTREME vignetting you'll see was from the wide-angle sun shade (a necessity if the sun can in any way directly touch this lens' glass) and from the lens itself. Yes, on 18mm, this lens vignettes with neither filters or shades attached. Were this a 20mm minimum lens, it would not vignette until there were a filter AND sunshade affixed, but not one or the other.


A Budweiser truck passing AT&T Park. 1/6th at f4. This is the only setting I remember because I was furious at myself for forgetting totake it at 1/30th so it would expose properly. That said, it exposed properly. One of the few one the reolls that needed no postprocessing other than cropping. The sun shade was on so the vignetting was not limited to the corners. It was like this one time that I took my Canon Elph to a telescope and took a picture through it and there was a black circle around the shot. That was how badly this Samyang vignetted with a sunshade. I expected that, though, because the sunshade is visible in the K1000's viewfinder, which is 89% or 92%. Something like that.


My favorite shot off both rolls, this was a hand-held 1/5th exposure. I remember because I was CERTAIN that the shutter had shaken the camera, or maybe that almost falling off the concrete stoop around the sea lion had shaken it. But I knew I had shaken the camera. Guess not. And I'm glad since this shot took minutes to set up -- angling the camera to fill the fame with the shadow at just the right angle and then waiting for the sun to move a few fractions of a degree. My neck cramped after that. This was shot at the marina next to AT&T PArk, but I think that the status is part of the AT&T Park Promenade.


William McCovey. Well, not really, more accurately a larger-than-life statue. The scanner noise is, according to Epson, a hardware glitch which can't be fixed and isn't covered by the warranty. So, Epson, thank you for that. I'm glad I got this scanner for free. I'm not, however, planning to buy an actual Epson in lieu of the company's views on this known and frequent Perfection 1670 issue. Anyone else see the irony of calling this scanner "Perfection?" Okay, then, this was an extremely thick negative. Processing the Ilford was very difficult. I did both rolls separately because I couldn't believe they take 15 minutes. So I did one at 15 minutes and one at 12. Both turned out the same: extremely thick in general. So I need to find out if negatives become thicker from over- or under-developing. Maybe next time I can correct my lack of light gauging with processing AND post processing.


I love this bridge and this take on it, but wish I could excise that darn pole on the left from this photo. I'll be back on this road again with a camera set up to try this shot on a better day. Anyway, from the other side, this bridge looks like a big walrus with concrete tusks. So that's neat. First time I heard the bridge siren sound, I damn near dove under my desk. See, in Illinois, that sounds means a tornado is coming and tornadoes, as we Midwesterners know, all have a personal vendetta for us. Out here, that siren just means a kayaker couldn't wait till low tide to paddle into the bay.


Last image I'll share here. This is a statue called Sea Change in the South Beach Park. I don't get it, but it was fun to grab a different angle on it than most people seem to. Fun until I stood up and realized by pants seat was wet from dew and I had a meeting with the VPs in nine minutes. Needless to say, I got there first and left last.

As always, here is the entire album: https://picasaweb.google.com/102333270936007447976/Ilford50ISOInSF and your comments are always appreciated.


Reply

To bad Epson added the feature to the scanner. The shots look like they would be great without the extra added noise.


Reply

Have you checked the batteries of your camera's exposimeter?
Because I'm of the impression that it over-exposes on a consistent basis.
Weak batteries might explain that.
(I assume that the development was done correctly and that the scanner's exposure wasn't set wrongly).


Reply

Hey, Orio,

Both rolls were extremely thick, so I agree that it's a metering issue. I jumped right to imperfect meter because it metered 100-400 ISO spot-on a week ago and the battery was replaced in June. It seems the battery ought to last more than a couple-dozen rolls, though. And I'm judicious about keeping a body cap on the K1000 when it's not in use to preserve the meter. Perhaps light coming in from the viewer in triggering the meter and prematurely draining the battery? I'll give it a shot again with a new battery in a week or so. Tomorrow I'm going to try the Ilford film in my F3 and on Friday in my AE-1, RT, or N70 (TBD depending on my mood Friday morning). That will give me two other cameras with working light meters to check the film against and I can gauge the results against a third roll taken with the K1000 and a fresh battery.


Reply

mmelvis писал(а):
To bad Epson added the feature to the scanner. The shots look like they would be great without the extra added noise.

+1 great pictures in poor finish Twisted Evil


Reply

Agree with Attila on this. Great shots though.