| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
std
 Зарегистрирован: 09.02.2010 Сообщения: 1826 Откуда: Bulgaria
|
 Отправлено: Ср Ноя 30, 2011 12:08 pm Заголовок сообщения: Kiev and J12 focus misalignment |
|
 Отправлено: Ср Ноя 30, 2011 12:08 pm Заголовок сообщения: Kiev and J12 focus misalignment |
|
|
std wrote:
Hi Guys,
I've got myself almost mint Kiev RF with Jupiter 8M.
Later on i got Jupiter-12 for it.
The first film from the J12 looks very much out of focus. I have only one picture which looks OK and it is because the lens was stopped down. For me it looks like the lens focuses closer than expected, for example instead of 1m if focuses at 30 cm.
#1 - Here for example the focus should be on the river not on the leaves
#2 And this is from close distance should be on the face instead on the bottle.
The internal rangefinder of the Kiev looks correct as it measures the distance properly ( at distance 2m it shows 2m on lens scale).
I guess that the J8 also focuses fine.
So I'm thinking the problem is in J12. I don't have experience with it and I'm wondering is there any special way of mounting it to the body?
Or is it possible that the lens is not properly aligned to the scale markings? _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| Наверх |
|
 |
Sevo
 Зарегистрирован: 22.08.2008 Сообщения: 1189 Откуда: Frankfurt, Germany
Expire: 2012-12-03
|
 Отправлено: Ср Ноя 30, 2011 12:36 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 12:36 pm Заголовок сообщения: |
|
|
Sevo wrote:
It is almost impossible to attach a Contax mount lens so drastically wrong that it has such a considerable focus error. But it could be either a misaligned lens or a misaligned outer mount/camera front - you'll have to send in both, or try with another lens or body to figure out which one is wrong. _________________ Sevo |
|
| Наверх |
|
 |
Mos6502
 Зарегистрирован: 20.06.2011 Сообщения: 960 Откуда: Austin
|
 Отправлено: Ср Ноя 30, 2011 12:45 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 12:45 pm Заголовок сообщения: |
|
|
Mos6502 wrote:
Is the lens focusing at all? The point of intended focus in those pictures is dramatically different, but the actual focus seems about the same. |
|
| Наверх |
|
 |
Attila
 Зарегистрирован: 24.02.2007 Сообщения: 58002
Expire: 2025-11-18
|
 Отправлено: Ср Ноя 30, 2011 12:53 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 12:53 pm Заголовок сообщения: |
|
|
Attila wrote:
You have bad luck really, I bought many of them all are works trouble free |
|
| Наверх |
|
 |
Orio
Зарегистрирован: 24.02.2007 Сообщения: 29545 Откуда: West Emilia
Expire: 2012-12-04
|
 Отправлено: Ср Ноя 30, 2011 1:47 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 1:47 pm Заголовок сообщения: |
|
|
Orio wrote:
You should not need to use lens scale, once mounted the lens should be coupled with the rangefinder.
I would have said that the rangefinder needs regulation, but if you say that it focuses fine with the J8, then
it must be a problem with the J12 _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Наверх |
|
 |
std
 Зарегистрирован: 09.02.2010 Сообщения: 1826 Откуда: Bulgaria
|
 Отправлено: Ср Ноя 30, 2011 2:12 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 2:12 pm Заголовок сообщения: |
|
|
std wrote:
Looks like the J12 focuses .. at lest it moves his back element for 3-4 mm when i turn the focus ring.
I will check it with the technician here, maybe the lens is not aligned.
Very common for soviet manufacturing, especially if it was a friday build  _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| Наверх |
|
 |
Attila
 Зарегистрирован: 24.02.2007 Сообщения: 58002
Expire: 2025-11-18
|
 Отправлено: Ср Ноя 30, 2011 2:30 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 2:30 pm Заголовок сообщения: |
|
|
Attila wrote:
| std писал(а): |
Looks like the J12 focuses .. at lest it moves his back element for 3-4 mm when i turn the focus ring.
I will check it with the technician here, maybe the lens is not aligned.
Very common for soviet manufacturing, especially if it was a friday build  |
I guess too especially if no shows sign of usage |
|
| Наверх |
|
 |
std
 Зарегистрирован: 09.02.2010 Сообщения: 1826 Откуда: Bulgaria
|
 Отправлено: Ср Ноя 30, 2011 2:32 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 2:32 pm Заголовок сообщения: |
|
|
std wrote:
It's like new in a box and with paper  _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| Наверх |
|
 |
kansalliskala
 Зарегистрирован: 19.07.2007 Сообщения: 5122 Откуда: Southern Finland countryside
Expire: 2016-12-30
|
 Отправлено: Ср Ноя 30, 2011 2:33 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 2:33 pm Заголовок сообщения: |
|
|
kansalliskala wrote:
Does the distance scale of the helicoid show good figures against some known distance. It is very accurate usually between 1 and 2 meters. (note that the distance is from film plane, not helicoid) _________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| Наверх |
|
 |
Attila
 Зарегистрирован: 24.02.2007 Сообщения: 58002
Expire: 2025-11-18
|
 Отправлено: Ср Ноя 30, 2011 2:35 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 2:35 pm Заголовок сообщения: |
|
|
Attila wrote:
| std писал(а): |
It's like new in a box and with paper  |
Bingo factory defected, worth to fix it by an expert technician, usually just a simple dismantle and assembly well. |
|
| Наверх |
|
 |
Nesster
 Зарегистрирован: 24.04.2008 Сообщения: 5883 Откуда: NJ, USA
Expire: 2014-02-20
|
 Отправлено: Ср Ноя 30, 2011 2:36 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 2:36 pm Заголовок сообщения: |
|
|
Nesster wrote:
I do know the mounting of the J12 is fiddly, it took me a while to figure it out and to get it seated properly. I'm thinking if you haven't managed to seat the lens in all the way the mismatch may be with the focus coupling cam in the camera.
After some work here's how mine looks mounted (and I'm not about to un-mount it any time soon! ) Note where the lens clip is relative to the rest - it should be approximately where I have it, give or take a bit.
Canon Universal Finder, Kiev 4, Jupiter-12 by Nesster, on Flickr
ps. just a thought that occurred to me - make sure both lens and camera are set to infinity before mounting the lens _________________ -Jussi
Camera photos
Print Photographica
Последний раз редактировалось Nesster Ср Ноя 30, 2011 3:57 pm; всего правок: 1 |
|
| Наверх |
|
 |
Attila
 Зарегистрирован: 24.02.2007 Сообщения: 58002
Expire: 2025-11-18
|
 Отправлено: Ср Ноя 30, 2011 2:46 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 2:46 pm Заголовок сообщения: |
|
|
Attila wrote:
Handsome combo! |
|
| Наверх |
|
 |
Joosep
 Зарегистрирован: 25.01.2010 Сообщения: 305 Откуда: Estonia, Tallinn
|
 Отправлено: Ср Ноя 30, 2011 2:54 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 2:54 pm Заголовок сообщения: |
|
|
Joosep wrote:
Put the camera down. Focus on something with the rf system. Then measure it in real-life and compare to the numbers on the lens.
This will tell you if the lens is off, or the rf system. (Most likely the rf, which can be modified at home). _________________ The future is analogue.
23 cameras, 25 lenses and counting. |
|
| Наверх |
|
 |
Orio
Зарегистрирован: 24.02.2007 Сообщения: 29545 Откуда: West Emilia
Expire: 2012-12-04
|
 Отправлено: Ср Ноя 30, 2011 2:59 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 2:59 pm Заголовок сообщения: |
|
|
Orio wrote:
| Joosep писал(а): |
| (Most likely the rf, which can be modified at home). |
I also thought about the RF, but he reports that the Jupiter-8 focuses correctly,
so it must be the lens. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Наверх |
|
 |
Sevo
 Зарегистрирован: 22.08.2008 Сообщения: 1189 Откуда: Frankfurt, Germany
Expire: 2012-12-03
|
 Отправлено: Ср Ноя 30, 2011 4:03 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 30, 2011 4:03 pm Заголовок сообщения: |
|
|
Sevo wrote:
| Nesster писал(а): |
I do know the mounting of the J12 is fiddly, it took me a while to figure it out and to get it seated properly. I'm thinking if you haven't managed to seat the lens in all the way the mismatch may be with the focus coupling cam in the camera.
|
It is possible to jam the lens against the internal mount - but in this case the rangefinder, the lens or both would be stuck. If the barrel can be turned without force and the rangefinder moves in concert with it (and matching the on-barrel metre distances), the lens seems to be correctly seated. _________________ Sevo |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|