MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

36,4mm - C-Mount Adapter? :( Short T-Mount Adapter?
Предыдущая тема :: Следующая тема  


Reply

I need an 36,4mm x 1mm "Vixen Scewmount" to C-Mount or a similar to get my Sony NEX working on my new pretty extreme Celestron 500mm/F3.6 Schmidt-Newton mirror lens.

I was able to find an from 36,4mm to 42mm T-Mount for 20€
http://www.teleskop-express.de/shop/product_info.php/info/p577_Adapter--M36-4-aussen---T2-aussen---Fokaladapter-fuer-Vixen.html

The problem is that the T-Mount-NEX adapters are too long.

The only solution I was able to find right yet was to buy an NEX-52mm reversed lens adapter (10€), an 52mm-->48mm reducer (5€), an 48mm - T2 adapter (20€) and the 36,4mm - T-Mount (20€)

That would be 55€ for an 4x stacked adapter.

Has anyone a better idea for or an more dressy solution? Maybe were to find an short T-Mount-NEX adapter etc.?


Reply

If helpful I have T2-C-mount adapter you can have for shipping cost:







Reply

ForenSeil писал(а):
I need an 36,4mm x 1mm "Vixen Scewmount" to C-Mount or a similar to get my Sony NEX working on my new pretty extreme Celestron 500mm/F3.6 Schmidt-Newton mirror lens.

I was able to find an from 36,4mm to 42mm T-Mount for 20€
http://www.teleskop-express.de/shop/product_info.php/info/p577_Adapter--M36-4-aussen---T2-aussen---Fokaladapter-fuer-Vixen.html

The problem is that the T-Mount-NEX adapters are too long.

The only solution I was able to find right yet was to buy an NEX-52mm reversed lens adapter (10€), an 52mm-->48mm reducer (5€), an 48mm - T2 adapter (20€) and the 36,4mm - T-Mount (20€)

That would be 55€ for an 4x stacked adapter.

Has anyone a better idea for or an more dressy solution? Maybe were to find an short T-Mount-NEX adapter etc.?


The problem isn't that the T-Mount-NEX adapter is too long, but the 36,4 to T-Mount adapter is. The T-mount is supposed to be 55mm away from the film/sensor. Any normal T-mount adapter, be it to NEX or C-mount, will be designed to reach that 55mm flange distance. If the T-NEX adapter doesn't work for you, nor will any other standard T adapter.

Can you determine how thick you need your adapter from T-mount to NEX to be for your setup?

The standard T-NEX adapter should be (55-18=) 37mm thick. If you go with a combination of adapters as you mention above you'll end up with a fixed length that should be shorter than that 37mm. One other way is connecting a M42 adapter to the Vixen-T-adapter. Normally it isn't recommended to mix T-mount and M42 as they are both 42mm in diameter but different in speed, 0.75 versus 1.0mm. But jamming a m42 into a T mount results in a very solid connection. A normal M42 to NEX adapter is (45.5-18=) 27.5mm thick. If that is narrow enough for you I'd recommend a m42-NEX adapter with a rotating mount, so you can adjust the angle of the camera wrt the lens, like this one:

Нажмите здесь, чтобы посмотреть на Ebay.de

If you need less than 27.5mm you can try a helicoid focussing m42-NEX adapter, with a minimum thickness of 13mm:
Нажмите здесь, чтобы посмотреть на Ebay.de

If you need even less thickness, I've seen a few 2-3mm thick M42-NEX adapters once, but I can't find them right now. I've got a C-mount-NEX adapter that also has m42 threads, making it about 3mm thick. The problem with any C-mount adapter in this setup is the risk of vignetting because of the narrow C-mount.