| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
philslizzy
 Зарегистрирован: 07.08.2012 Сообщения: 4753 Откуда: Cheshire, England
|
 Отправлено: Вс Ноя 24, 2013 11:36 pm Заголовок сообщения: Mains cables for Bowens Monolites? |
|
 Отправлено: Вс Ноя 24, 2013 11:36 pm Заголовок сообщения: Mains cables for Bowens Monolites? |
|
|
philslizzy wrote:
Where can you get them? old 1980's or 1970's lites have a 3 pin plug. I had some years ago and there are a couple going cheap. the socket looks like this and my drawing of the plug.
edit: plug is nothing like it. I remember it had 3 hollow pins _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official.
Последний раз редактировалось philslizzy Вт Ноя 26, 2013 8:03 pm; всего правок: 1 |
|
| Наверх |
|
 |
Lloydy
 Зарегистрирован: 02.09.2009 Сообщения: 7880 Откуда: Ironbridge. UK.
Expire: 2022-01-01
|
 Отправлено: Пн Ноя 25, 2013 12:31 am Заголовок сообщения: |
|
 Отправлено: Пн Ноя 25, 2013 12:31 am Заголовок сообщения: |
|
|
Lloydy wrote:
what diameter is it Phil ? I think there's a box of old plugs at the back of my shed. It's probably easier to change the plug and socket to the kettle / PC power lead type. Everyone's got spare leads lying around for those. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Наверх |
|
 |
philslizzy
 Зарегистрирован: 07.08.2012 Сообщения: 4753 Откуда: Cheshire, England
|
 Отправлено: Вт Ноя 26, 2013 12:12 pm Заголовок сообщения: |
|
 Отправлено: Вт Ноя 26, 2013 12:12 pm Заголовок сообщения: |
|
|
philslizzy wrote:
I'm thinking that but it could be a costly investment if I cant. The plug appears to be a bulgin 3-pin type. Unfortunately I dont have the lights with me so I cant tell you the diameter.
This is the type of light and a better picture of the socket.
The plug pins appear to be hollow with contacts inside. I hoped it may be a Bulgin type but cant find anything online. There appears to be a stylised 'B' at the bottom of the socket. That probably is a Bowens mark, rather than Bulgin. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Наверх |
|
 |
Lloydy
 Зарегистрирован: 02.09.2009 Сообщения: 7880 Откуда: Ironbridge. UK.
Expire: 2022-01-01
|
 Отправлено: Вт Ноя 26, 2013 2:52 pm Заголовок сообщения: |
|
 Отправлено: Вт Ноя 26, 2013 2:52 pm Заголовок сообщения: |
|
|
Lloydy wrote:
Get 'messin' Phil, the chances of finding those old leads are pretty poor. If you change them for 'kettle sockets' then new ready made leads are easy to find, as are extensions with the right plug and sockets.
Use a big fused one like this -
http://www.ebay.co.uk/itm/Fused-IEC-Chassis-Mains-Kettle-Socket-/300959366179?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item4612937c23
and you will probably be able to modify the existing hole, the smaller unfused ones might need a bit of thin metal plate to cover the oversize hole. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Наверх |
|
 |
Excalibur
 Зарегистрирован: 19.07.2009 Сообщения: 5018 Откуда: UK
Expire: 2014-04-21
|
 Отправлено: Вт Ноя 26, 2013 4:21 pm Заголовок сообщения: |
|
 Отправлено: Вт Ноя 26, 2013 4:21 pm Заголовок сообщения: |
|
|
Excalibur wrote:
Is this any good, but the pin spacing is equal.
http://www.ebay.co.uk/itm/Bulgin-3-Pin-Cable-Line-Socket-Female-PX0430-SE-250Vac-1-5A-Fits-PX0429-2610-/141100800814
or mod it to this:-
http://www.adverts.ie/camera-accessories/bowens-monolite-400-e/255083 _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| Наверх |
|
 |
philslizzy
 Зарегистрирован: 07.08.2012 Сообщения: 4753 Откуда: Cheshire, England
|
 Отправлено: Вт Ноя 26, 2013 8:05 pm Заголовок сообщения: |
|
 Отправлено: Вт Ноя 26, 2013 8:05 pm Заголовок сообщения: |
|
|
philslizzy wrote:
I dont think so. I may just take the plunge and buy. Perhaps I can adapt. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Наверх |
|
 |
pentaxpete
 Зарегистрирован: 02.12.2011 Сообщения: 697 Откуда: BRENTWOOD England
|
 Отправлено: Ср Ноя 27, 2013 9:40 am Заголовок сообщения: |
|
 Отправлено: Ср Ноя 27, 2013 9:40 am Заголовок сообщения: |
|
|
pentaxpete wrote:
I have a couple of the SAME FLASHES but I need the mains leads! I have an address for BOWENS and another flash repairer here in England : Bowens 355 old Road CLACTON C015 3RH Tel : 01255 422807
OR Denis Willing 01223 845205 ( Great Sheldon, Cambridgeshire) Hope these are still 'LIVE' contacts regards -- Peter _________________ Long Live REAL PHOTOGRAPHY ! |
|
| Наверх |
|
 |
twinquartz
 Зарегистрирован: 11.06.2012 Сообщения: 316 Откуда: Sweden
Expire: 2013-10-29
|
 Отправлено: Ср Ноя 27, 2013 6:23 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 27, 2013 6:23 pm Заголовок сообщения: |
|
|
twinquartz wrote:
In case you have to re-plug it, would this schematics be of assistance?
http://static.photo.net/attachments/bboard/00V/00VsuN-224683584.jpg |
|
| Наверх |
|
 |
philslizzy
 Зарегистрирован: 07.08.2012 Сообщения: 4753 Откуда: Cheshire, England
|
 Отправлено: Ср Ноя 27, 2013 8:30 pm Заголовок сообщения: |
|
 Отправлено: Ср Ноя 27, 2013 8:30 pm Заголовок сообщения: |
|
|
philslizzy wrote:
| pentaxpete писал(а): |
I have a couple of the SAME FLASHES but I need the mains leads! I have an address for BOWENS and another flash repairer here in England : Bowens 355 old Road CLACTON C015 3RH Tel : 01255 422807
OR Denis Willing 01223 845205 ( Great Sheldon, Cambridgeshire) Hope these are still 'LIVE' contacts regards -- Peter |
Hi Pete I'lll give it a go tomorrow and let you know. Cheers
Perhaps not, in this case, I will print it out though in case I need to make incursions! _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Наверх |
|
 |
Farside
 Зарегистрирован: 01.09.2007 Сообщения: 6579 Откуда: Ireland
Expire: 2013-12-27
|
 Отправлено: Чт Ноя 28, 2013 12:14 am Заголовок сообщения: |
|
 Отправлено: Чт Ноя 28, 2013 12:14 am Заголовок сообщения: |
|
|
Farside wrote:
Here you go...
http://bulgin.co.uk/Products/GenPurpose_Connectors/GenPurpose_Connectors.html
edit.
Actually no; there's a keyway in this one, which is likely an updated 'safer' version of yours. At the very least it gives you a choice of replacing the plug+socket with a modern type that looks just like the old one and retains originality/size instead of butchering the front panel for an IEC connector. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Наверх |
|
 |
philslizzy
 Зарегистрирован: 07.08.2012 Сообщения: 4753 Откуда: Cheshire, England
|
 Отправлено: Чт Ноя 28, 2013 12:37 am Заголовок сообщения: |
|
 Отправлено: Чт Ноя 28, 2013 12:37 am Заголовок сообщения: |
|
|
philslizzy wrote:
I got excited for a moment then I wondered why the keyway. I remember you could only put the plug in one way on the bowens - heres why:
left: Bowens right: Bulgin _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Наверх |
|
 |
Excalibur
 Зарегистрирован: 19.07.2009 Сообщения: 5018 Откуда: UK
Expire: 2014-04-21
|
 Отправлено: Чт Ноя 28, 2013 2:44 pm Заголовок сообщения: |
|
 Отправлено: Чт Ноя 28, 2013 2:44 pm Заголовок сообщения: |
|
|
Excalibur wrote:
| Farside писал(а): |
Here you go...
http://bulgin.co.uk/Products/GenPurpose_Connectors/GenPurpose_Connectors.html
edit.
Actually no; there's a keyway in this one, which is likely an updated 'safer' version of yours. At the very least it gives you a choice of replacing the plug+socket with a modern type that looks just like the old one and retains originality/size instead of butchering the front panel for an IEC connector. |
That must be the most stupid plug to connect from a 230v mains supply......the person who designed that was an idiot  _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| Наверх |
|
 |
Farside
 Зарегистрирован: 01.09.2007 Сообщения: 6579 Откуда: Ireland
Expire: 2013-12-27
|
 Отправлено: Пн Дек 02, 2013 2:32 am Заголовок сообщения: |
|
 Отправлено: Пн Дек 02, 2013 2:32 am Заголовок сообщения: |
|
|
Farside wrote:
What I often do in these situations is simply add flylead with an inline socket on it, in this case, do away with the hard-to-find Bulgin entirely and use an IEC flylead socket.
It's always possible to make a safe cable exit from the equipment, using grommets and cable relief/grippers from the many dozens lying around in sparks' workshops. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Наверх |
|
 |
philslizzy
 Зарегистрирован: 07.08.2012 Сообщения: 4753 Откуда: Cheshire, England
|
 Отправлено: Пн Дек 02, 2013 11:02 am Заголовок сообщения: |
|
 Отправлено: Пн Дек 02, 2013 11:02 am Заголовок сообщения: |
|
|
philslizzy wrote:
The flylead was the final option - but as the lights are no no longer available this is all rather academic.
Thanks all of you for your input.
I will search for old ones now knowing I can use them. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|