| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
cyrano
 Зарегистрирован: 15.02.2013 Сообщения: 871 Откуда: UK
Expire: 2016-12-30
|
 Отправлено: Ср Мар 26, 2014 6:39 pm Заголовок сообщения: Helios 44M-4 issue. |
|
 Отправлено: Ср Мар 26, 2014 6:39 pm Заголовок сообщения: Helios 44M-4 issue. |
|
|
cyrano wrote:
I've got a VGC lens , as new really however the focus ring is totally loose. I can turn it freely but it makes no contact with the helicoid (?) and the lens barrel doesn't extend at all. Is this a simple fix and if so, is anyone aware of a means to repair it? I don't wish to start taking it to pieces and don't have the tools anyway. I can't see any grub screws externally so am unsure of my next move aside from asking here.
Serial # is :85173618
 _________________ A whole bunch of stuff. |
|
| Наверх |
|
 |
Lloydy
 Зарегистрирован: 02.09.2009 Сообщения: 7880 Откуда: Ironbridge. UK.
Expire: 2022-01-01
|
 Отправлено: Ср Мар 26, 2014 9:48 pm Заголовок сообщения: |
|
 Отправлено: Ср Мар 26, 2014 9:48 pm Заголовок сообщения: |
|
|
Lloydy wrote:
I suspect the three grub screws around the focusing barrel - between the distance numbers - are loose. Gently tighten them, turn the barrel clockwise looking at the front of the lens, till it hits the stop which is infinity. Then loosen the screws and set the barrel so the infinity mark lines up and re tighten the screws. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Наверх |
|
 |
cyrano
 Зарегистрирован: 15.02.2013 Сообщения: 871 Откуда: UK
Expire: 2016-12-30
|
 Отправлено: Чт Мар 27, 2014 8:39 am Заголовок сообщения: |
|
 Отправлено: Чт Мар 27, 2014 8:39 am Заголовок сообщения: |
|
|
cyrano wrote:
I'm afraid not Lloydy, there's no visible grub screws anywhere. I had suspected something like this as the focusing was starting to slip a little bit before eventually going completely slack but it would appear to be an internal fix which I'm a tad reluctant to try as the lens is immaculate otherwise. _________________ A whole bunch of stuff. |
|
| Наверх |
|
 |
RSalles
 Зарегистрирован: 12.08.2012 Сообщения: 1372 Откуда: Brazil - RS / South
|
 Отправлено: Чт Мар 27, 2014 2:24 pm Заголовок сообщения: |
|
 Отправлено: Чт Мар 27, 2014 2:24 pm Заголовок сообщения: |
|
|
RSalles wrote:
| Lloydy писал(а): |
| I suspect the three grub screws around the focusing barrel - between the distance numbers - are loose. Gently tighten them, turn the barrel clockwise looking at the front of the lens, till it hits the stop which is infinity. Then loosen the screws and set the barrel so the infinity mark lines up and re tighten the screws. |
X2!
The 3 screws are the small size made I can imagine, it can even be covered by dust, etc, so please look again. Otherwise, post a pic of the lens itself.
Usually, if the helicoid thread becomes seriously loose the movement will stick in place and it's a hell sometimes to get them apart: one part of the helicoid will pass over it's counterpart blocking the movement. If both parts of the helicoid disengaged from each other, if I'm not wrong, the lens will separate in two parts, not just become loose.
Cheers,
Renato |
|
| Наверх |
|
 |
Layer-cake
 Зарегистрирован: 18.03.2013 Сообщения: 560 Откуда: Cape Town
|
 Отправлено: Чт Мар 27, 2014 2:31 pm Заголовок сообщения: |
|
 Отправлено: Чт Мар 27, 2014 2:31 pm Заголовок сообщения: |
|
|
Layer-cake wrote:
can you remove the plastic grip ring? they could be under there!! |
|
| Наверх |
|
 |
cyrano
 Зарегистрирован: 15.02.2013 Сообщения: 871 Откуда: UK
Expire: 2016-12-30
|
 Отправлено: Чт Мар 27, 2014 5:35 pm Заголовок сообщения: |
|
 Отправлено: Чт Мар 27, 2014 5:35 pm Заголовок сообщения: |
|
|
cyrano wrote:
Alas the focus ring is made of alloy and doesn't come off.
apologies for over sizing but it helps. I will delete later.
Deleted. _________________ A whole bunch of stuff.
Последний раз редактировалось cyrano Пт Мар 28, 2014 3:54 am; всего правок: 1 |
|
| Наверх |
|
 |
Layer-cake
 Зарегистрирован: 18.03.2013 Сообщения: 560 Откуда: Cape Town
|
 Отправлено: Чт Мар 27, 2014 5:48 pm Заголовок сообщения: |
|
 Отправлено: Чт Мар 27, 2014 5:48 pm Заголовок сообщения: |
|
|
Layer-cake wrote:
I did actually do a tear down on one of these over a year ago but for the life of me I cant remember the inner construction of it!! luckily there are many people who have tried to fix these so quite a few walk throughs online:
Heres a google search for disassembly, im sure it will probably be a retainer ring inside that the screws arent holding into place anymore:
https://www.google.ie/search?q=helios+44m+4+disassembly&ie=utf-8&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&gws_rd=cr&ei=dWM0U9TvNcOu7Abn5YDACg |
|
| Наверх |
|
 |
Lloydy
 Зарегистрирован: 02.09.2009 Сообщения: 7880 Откуда: Ironbridge. UK.
Expire: 2022-01-01
|
 Отправлено: Чт Мар 27, 2014 9:36 pm Заголовок сообщения: |
|
 Отправлено: Чт Мар 27, 2014 9:36 pm Заголовок сообщения: |
|
|
Lloydy wrote:
I have no idea about the later version, I was looking at my earlier ones. Could it be the same as Takumars - under the name ring there's two sets of three screws, maybe the set locking the barrel is loose?
Does the focus barrel rotate all the way round without stopping, or does it just rotate for a certain amount? _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Наверх |
|
 |
SXR_Mark
 Зарегистрирован: 12.06.2010 Сообщения: 506 Откуда: England
|
 Отправлено: Чт Мар 27, 2014 10:31 pm Заголовок сообщения: |
|
 Отправлено: Чт Мар 27, 2014 10:31 pm Заголовок сообщения: |
|
|
SXR_Mark wrote:
I think you have to remove (unscrew) the name ring then remove (three) screws that hold the filter ring on. Underneath the filter ring, between the focus ring and the inner helicoid, there are three screws that clamp the focus ring to the outer helicoid. I think that's how it works.
Mark _________________ Olympus OM-D E-M1 for everything |
|
| Наверх |
|
 |
cyrano
 Зарегистрирован: 15.02.2013 Сообщения: 871 Откуда: UK
Expire: 2016-12-30
|
 Отправлено: Пт Мар 28, 2014 3:52 am Заголовок сообщения: |
|
 Отправлено: Пт Мар 28, 2014 3:52 am Заголовок сообщения: |
|
|
cyrano wrote:
The barrel only rotates to the near and far limit of the focus travel, I have bought this wrench to try :
http://www.ebay.co.uk/itm/200978102480?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 _________________ A whole bunch of stuff. |
|
| Наверх |
|
 |
cyrano
 Зарегистрирован: 15.02.2013 Сообщения: 871 Откуда: UK
Expire: 2016-12-30
|
 Отправлено: Вт Апр 01, 2014 12:05 pm Заголовок сообщения: |
|
 Отправлено: Вт Апр 01, 2014 12:05 pm Заголовок сообщения: |
|
|
cyrano wrote:
Well, ordered the tool, took some bits off and still no sign of access to the focusing parts so I am now in possession of a non functioning but otherwise immaculate Helios 44M-4 if anyone is needing spares. _________________ A whole bunch of stuff. |
|
| Наверх |
|
 |
cyrano
 Зарегистрирован: 15.02.2013 Сообщения: 871 Откуда: UK
Expire: 2016-12-30
|
 Отправлено: Чт Апр 03, 2014 6:18 am Заголовок сообщения: |
|
 Отправлено: Чт Апр 03, 2014 6:18 am Заголовок сообщения: |
|
|
cyrano wrote:
Ignore the above, I went in via the back of the lens and after 4 hours of frustration and dropping micro screws have now got a functional focus action. Now I can use the lens but it will need to be re-lubed and the aperture ring is now click less and loose but there you go. I'm pleased with my first attempt at a lens disassemble.
What a relief. _________________ A whole bunch of stuff. |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|