MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

Fixing automatic diaphragm lever of Oreston 1.8/50mm ?!
Предыдущая тема :: Следующая тема  


Reply

I decided to clean the diaphragm of Oreston 1.8/50mm (similar to old Pentacon auto 1.8/50mm)
After successfully cleaning i have assembled the rear part.
By turning the diaphragm ring and pressing the lever for the automatic diaphragm it closes to the desired position, but does not return automatically. The diaphragm remains closed and can be opened only by reverse rotation of the diaphragm ring.
I do not understand the reason for this!
Does someone have a suggestion or advice?
Thank you!





Reply

The reason of the problem with the lever was that I tightened strongly that screw (see Picture)
After tightening, it have to be screwed back 1 / 4 turn.
Furthermore one spring was released at its upper end.