| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
kuuan
 Зарегистрирован: 14.01.2008 Сообщения: 4569 Откуда: right now: Austria
Expire: 2014-12-26
|
 Отправлено: Пн Дек 14, 2015 7:11 am Заголовок сообщения: any reasonable coating service or solution? |
|
 Отправлено: Пн Дек 14, 2015 7:11 am Заголовок сообщения: any reasonable coating service or solution? |
|
|
kuuan wrote:
Over the years I have accumulated quite a number of lenses that would greatly benefit if they had a coating, usually of just one element of even only one surface, repaired resp. replaced. I believe there are some services out there that do coating but which generally, for repairing other than very valuable lenses, are not recommended simply because they are expensive.
- I wonder if there hasn't come up an economical alternative e.g. out of China. Or if there even is any DIY solution just using a spray or something alike, given that it won't be a perfect solution but enough to improve a lens of which the coating already had been removed.
any info anyone? _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Наверх |
|
 |
DConvert
 Зарегистрирован: 12.06.2010 Сообщения: 984 Откуда: Essex UK
|
 Отправлено: Пн Дек 14, 2015 8:28 am Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 8:28 am Заголовок сообщения: |
|
|
DConvert wrote:
A DIY solution isn't going to work. the thickness of the coating is critical in getting it to work & has to be controlled to very precise tolerances. |
|
| Наверх |
|
 |
calvin83
 Зарегистрирован: 12.04.2009 Сообщения: 7740 Откуда: Hong Kong
|
 Отправлено: Пн Дек 14, 2015 9:12 am Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 9:12 am Заголовок сообщения: |
|
|
calvin83 wrote:
There is polishing and coating service in China for much less but I would suggest you leave it as it. The lens may need to be polished before re-coating and there is risk of breaking the glass. All the cemented elements are not recommended for re-coating. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Наверх |
|
 |
kuuan
 Зарегистрирован: 14.01.2008 Сообщения: 4569 Откуда: right now: Austria
Expire: 2014-12-26
|
 Отправлено: Пн Дек 14, 2015 10:09 am Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 10:09 am Заголовок сообщения: |
|
|
kuuan wrote:
thank you very much for your answers
| calvin83 писал(а): |
| There is polishing and coating service in China for much less but I would suggest you leave it as it. The lens may need to be polished before re-coating and there is risk of breaking the glass. All the cemented elements are not recommended for re-coating. |
hm Calvin, for me this still is great news, and I really would love to get the contact info for that service! In case they don't converse in English I may evenask for further help from you, Calvin
- the lens that could benefit most from re-coating is an M-Rokkor 2.8/28 that had the known 'white spots', they had gone beyond the rim and had corrupted the coating on the whole surface. It was rather unusable as it was, I took the effort and had removed / polished that bad coating already. Sharpness is much improved, but it glows badly and remains rather unusable. That is polishing already is done, and if it really broke it just would remain unusable.. Well, I have seen the same lens with the fault as bad as mine selling for 250 to 300 usd, and after my polishing it even looks clean, but I would not want to cheat anybody and as it is and declaring it's state truthfully it hardly is of much value.
Same situation with at least one more lens, and I have a few Canon LTMs with hazy element, one already polished, some 3 or 4 others not yet, but again, as is they hardly have value, as I see it they all only could benefit _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Наверх |
|
 |
kds315*
 Зарегистрирован: 12.03.2008 Сообщения: 16912 Откуда: Kehl, Germany
Expire: 2021-03-09
|
 Отправлено: Пн Дек 14, 2015 10:29 am Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 10:29 am Заголовок сообщения: |
|
|
kds315* wrote:
I had a source in Russia, but they stopped doing that. Not cheap though it was.
There is a seller "prolenscla" on ebay from Taiwan who offers those services incl. re-cementing: http://www.ebay.com/usr/prolenscla?_trksid=p2047675.l2559
Quote him: "Charge for lens group separation re-cementing treatment and damaged coating polishing treatment starting from US$ 150.
The actual charge depend on which kind of the lens and the size of the lens need to repair. It is necessary to negotiate between you
and me before sending me your lens." So I estimate it to be quite more actually...
On his FB site https://www.facebook.com/CLAmanualfocuslens he shows some impressive results, I must admit.
P.S.: I added this info to a Sticky here _________________ Klaus - Admin
"S'il vient a point, me souviendra" [Thomas Bohier (1460-1523)]
http://www.macrolenses.de for macro and special lens info
http://www.pbase.com/kds315/uv_photos for UV Images and lens/filter info
https://www.flickr.com/photos/kds315/albums my albums using various lenses
http://photographyoftheinvisibleworld.blogspot.com/ my UV BLOG
http://www.travelmeetsfood.com/blog Food + Travel BLOG
https://galeriafotografia.com Architecture + Drone photography
Currently most FAV lens(es):
X80QF f3.2/80mm
Hypergon f11/26mm
ELCAN UV f5.6/52mm
Zeiss UV-Planar f4/60mm
Zeiss UV-Planar f2/62mm
Lomo Уфар-12 f2.5/41mm
Lomo Зуфар-2 f4.0/350mm
Lomo ZIKAR-1A f1.2/100mm
Nikon UV Nikkor f4.5/105mm
Zeiss UV-Sonnar f4.3/105mm
CERCO UV-VIS-NIR f1.8/45mm
CERCO UV-VIS-NIR f4.1/94mm
CERCO UV-VIS-NIR f2.8/100mm
Steinheil Quarzobjektiv f1.8/50mm
Pentax Quartz Takumar f3.5/85mm
Carl Zeiss Jena UV-Objektiv f4/60mm
NYE OPTICAL Lyman-Alpha II f1.1/90mm
NYE OPTICAL Lyman-Alpha I f2.8/200mm
COASTAL OPTICS f4/60mm UV-VIS-IR Apo
COASTAL OPTICS f4.5/105mm UV-Micro-Apo
Pentax Ultra-Achromatic Takumar f4.5/85mm
Pentax Ultra-Achromatic Takumar f5.6/300mm
Rodenstock UV-Rodagon f5.6/60mm + 105mm + 150mm
|
|
| Наверх |
|
 |
kuuan
 Зарегистрирован: 14.01.2008 Сообщения: 4569 Откуда: right now: Austria
Expire: 2014-12-26
|
 Отправлено: Пн Дек 14, 2015 10:46 am Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 10:46 am Заголовок сообщения: |
|
|
kuuan wrote:
looks impressive, but I am looking for a service that is way cheaper, actually.
And Calvin, I am thinking of not sending in the whole lens but the single elements that have to be treated only, some polishing + coating, some coating only. Actually I'd also have cemented double elements that would need re-cementing, in case I do get the service in China you know to do some work for me, do you know if they also do re-cementing? _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Наверх |
|
 |
kds315*
 Зарегистрирован: 12.03.2008 Сообщения: 16912 Откуда: Kehl, Germany
Expire: 2021-03-09
|
 Отправлено: Пн Дек 14, 2015 11:18 am Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 11:18 am Заголовок сообщения: |
|
|
kds315* wrote:
| kuuan писал(а): |
looks impressive, but I am looking for a service that is way cheaper, actually.
And Calvin, I am thinking of not sending in the whole lens but the single elements that have to be treated only, some polishing + coating, some coating only. Actually I'd also have cemented double elements that would need re-cementing, in case I do get the service in China you know to do some work for me, do you know if they also do re-cementing? |
Yeah, but then the clock rings and we wake up - bummer really!  _________________ Klaus - Admin
"S'il vient a point, me souviendra" [Thomas Bohier (1460-1523)]
http://www.macrolenses.de for macro and special lens info
http://www.pbase.com/kds315/uv_photos for UV Images and lens/filter info
https://www.flickr.com/photos/kds315/albums my albums using various lenses
http://photographyoftheinvisibleworld.blogspot.com/ my UV BLOG
http://www.travelmeetsfood.com/blog Food + Travel BLOG
https://galeriafotografia.com Architecture + Drone photography
Currently most FAV lens(es):
X80QF f3.2/80mm
Hypergon f11/26mm
ELCAN UV f5.6/52mm
Zeiss UV-Planar f4/60mm
Zeiss UV-Planar f2/62mm
Lomo Уфар-12 f2.5/41mm
Lomo Зуфар-2 f4.0/350mm
Lomo ZIKAR-1A f1.2/100mm
Nikon UV Nikkor f4.5/105mm
Zeiss UV-Sonnar f4.3/105mm
CERCO UV-VIS-NIR f1.8/45mm
CERCO UV-VIS-NIR f4.1/94mm
CERCO UV-VIS-NIR f2.8/100mm
Steinheil Quarzobjektiv f1.8/50mm
Pentax Quartz Takumar f3.5/85mm
Carl Zeiss Jena UV-Objektiv f4/60mm
NYE OPTICAL Lyman-Alpha II f1.1/90mm
NYE OPTICAL Lyman-Alpha I f2.8/200mm
COASTAL OPTICS f4/60mm UV-VIS-IR Apo
COASTAL OPTICS f4.5/105mm UV-Micro-Apo
Pentax Ultra-Achromatic Takumar f4.5/85mm
Pentax Ultra-Achromatic Takumar f5.6/300mm
Rodenstock UV-Rodagon f5.6/60mm + 105mm + 150mm
|
|
| Наверх |
|
 |
kuuan
 Зарегистрирован: 14.01.2008 Сообщения: 4569 Откуда: right now: Austria
Expire: 2014-12-26
|
 Отправлено: Пн Дек 14, 2015 11:28 am Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 11:28 am Заголовок сообщения: |
|
|
kuuan wrote:
no worries and Klaus I am very good in making dreams come true, don't do much else, really  _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Наверх |
|
 |
calvin83
 Зарегистрирован: 12.04.2009 Сообщения: 7740 Откуда: Hong Kong
|
 Отправлено: Пн Дек 14, 2015 12:28 pm Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 12:28 pm Заголовок сообщения: |
|
|
calvin83 wrote:
For re-cementing, you can do it yourself with UV cement if you have the patent. The most difficult part is not gluing the elements but to separate them. My friends do it on their own too. If you want to align the elements more perfectly(for wide angle to short tele lens), you will need a device for collimation(workshops who made glasses should have one). Long focal length lenses are usually less prone to small misalignment except mirror lenses.
BTW, I heard some negative feedback from some local guys on the service mentioned above in Taiwan. There will be always some risk performing such repair. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/
Последний раз редактировалось calvin83 Вт Дек 15, 2015 12:24 pm; всего правок: 1 |
|
| Наверх |
|
 |
kuuan
 Зарегистрирован: 14.01.2008 Сообщения: 4569 Откуда: right now: Austria
Expire: 2014-12-26
|
 Отправлено: Пн Дек 14, 2015 12:34 pm Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 12:34 pm Заголовок сообщения: |
|
|
kuuan wrote:
my first trial to separate two elements had failed, nothing broken, but I just couldn't get them apart. - haven't given up yet  _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Наверх |
|
 |
calvin83
 Зарегистрирован: 12.04.2009 Сообщения: 7740 Откуда: Hong Kong
|
 Отправлено: Пн Дек 14, 2015 1:18 pm Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 1:18 pm Заголовок сообщения: |
|
|
calvin83 wrote:
One of the most safe way is to heat the element in oven slowly until you see there is change in the cement. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Наверх |
|
 |
kuuan
 Зарегистрирован: 14.01.2008 Сообщения: 4569 Откуда: right now: Austria
Expire: 2014-12-26
|
 Отправлено: Пн Дек 14, 2015 1:53 pm Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 1:53 pm Заголовок сообщения: |
|
|
kuuan wrote:
| calvin83 писал(а): |
| One of the most safe way is to heat the element in oven slowly until you see there is change in the cement. |
thank you Calvin. My next trial shall be in an oven. My first, failed trial was placing it on top of a 100W lamp, or was it a 60W only? Anyway, heat seemed not have been high enough. Or it's a cementing that won't bulge? It is from a CV Heliar LTM 2.5/75, not a very 'old' lens. _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Наверх |
|
 |
kds315*
 Зарегистрирован: 12.03.2008 Сообщения: 16912 Откуда: Kehl, Germany
Expire: 2021-03-09
|
 Отправлено: Пн Дек 14, 2015 2:18 pm Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 2:18 pm Заголовок сообщения: |
|
|
kds315* wrote:
It might have been cemented using UV cemented, hardened by UV light.
This can't be seperated by your method. _________________ Klaus - Admin
"S'il vient a point, me souviendra" [Thomas Bohier (1460-1523)]
http://www.macrolenses.de for macro and special lens info
http://www.pbase.com/kds315/uv_photos for UV Images and lens/filter info
https://www.flickr.com/photos/kds315/albums my albums using various lenses
http://photographyoftheinvisibleworld.blogspot.com/ my UV BLOG
http://www.travelmeetsfood.com/blog Food + Travel BLOG
https://galeriafotografia.com Architecture + Drone photography
Currently most FAV lens(es):
X80QF f3.2/80mm
Hypergon f11/26mm
ELCAN UV f5.6/52mm
Zeiss UV-Planar f4/60mm
Zeiss UV-Planar f2/62mm
Lomo Уфар-12 f2.5/41mm
Lomo Зуфар-2 f4.0/350mm
Lomo ZIKAR-1A f1.2/100mm
Nikon UV Nikkor f4.5/105mm
Zeiss UV-Sonnar f4.3/105mm
CERCO UV-VIS-NIR f1.8/45mm
CERCO UV-VIS-NIR f4.1/94mm
CERCO UV-VIS-NIR f2.8/100mm
Steinheil Quarzobjektiv f1.8/50mm
Pentax Quartz Takumar f3.5/85mm
Carl Zeiss Jena UV-Objektiv f4/60mm
NYE OPTICAL Lyman-Alpha II f1.1/90mm
NYE OPTICAL Lyman-Alpha I f2.8/200mm
COASTAL OPTICS f4/60mm UV-VIS-IR Apo
COASTAL OPTICS f4.5/105mm UV-Micro-Apo
Pentax Ultra-Achromatic Takumar f4.5/85mm
Pentax Ultra-Achromatic Takumar f5.6/300mm
Rodenstock UV-Rodagon f5.6/60mm + 105mm + 150mm
|
|
| Наверх |
|
 |
calvin83
 Зарегистрирован: 12.04.2009 Сообщения: 7740 Откуда: Hong Kong
|
 Отправлено: Пн Дек 14, 2015 2:43 pm Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 2:43 pm Заголовок сообщения: |
|
|
calvin83 wrote:
| kds315* писал(а): |
It might have been cemented using UV cemented, hardened by UV light.
This can't be seperated by your method. |
This may help but need to be careful with the chemicals.
http://www.dymax.com/images/pdf/literature/lit079_removal_of_cured_uv_adhesives_tb.pdf _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Наверх |
|
 |
kuuan
 Зарегистрирован: 14.01.2008 Сообщения: 4569 Откуда: right now: Austria
Expire: 2014-12-26
|
 Отправлено: Пн Дек 14, 2015 3:03 pm Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 3:03 pm Заголовок сообщения: |
|
|
kuuan wrote:
Klaus thank's, I am afraid that this might be the case
Calvin wow, a bit frightening but great information, thank you so much for that! _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Наверх |
|
 |
kds315*
 Зарегистрирован: 12.03.2008 Сообщения: 16912 Откуда: Kehl, Germany
Expire: 2021-03-09
|
 Отправлено: Пн Дек 14, 2015 3:03 pm Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 3:03 pm Заголовок сообщения: |
|
|
kds315* wrote:
Yes, indeed, and I would propose to only have experienced personnel do this! _________________ Klaus - Admin
"S'il vient a point, me souviendra" [Thomas Bohier (1460-1523)]
http://www.macrolenses.de for macro and special lens info
http://www.pbase.com/kds315/uv_photos for UV Images and lens/filter info
https://www.flickr.com/photos/kds315/albums my albums using various lenses
http://photographyoftheinvisibleworld.blogspot.com/ my UV BLOG
http://www.travelmeetsfood.com/blog Food + Travel BLOG
https://galeriafotografia.com Architecture + Drone photography
Currently most FAV lens(es):
X80QF f3.2/80mm
Hypergon f11/26mm
ELCAN UV f5.6/52mm
Zeiss UV-Planar f4/60mm
Zeiss UV-Planar f2/62mm
Lomo Уфар-12 f2.5/41mm
Lomo Зуфар-2 f4.0/350mm
Lomo ZIKAR-1A f1.2/100mm
Nikon UV Nikkor f4.5/105mm
Zeiss UV-Sonnar f4.3/105mm
CERCO UV-VIS-NIR f1.8/45mm
CERCO UV-VIS-NIR f4.1/94mm
CERCO UV-VIS-NIR f2.8/100mm
Steinheil Quarzobjektiv f1.8/50mm
Pentax Quartz Takumar f3.5/85mm
Carl Zeiss Jena UV-Objektiv f4/60mm
NYE OPTICAL Lyman-Alpha II f1.1/90mm
NYE OPTICAL Lyman-Alpha I f2.8/200mm
COASTAL OPTICS f4/60mm UV-VIS-IR Apo
COASTAL OPTICS f4.5/105mm UV-Micro-Apo
Pentax Ultra-Achromatic Takumar f4.5/85mm
Pentax Ultra-Achromatic Takumar f5.6/300mm
Rodenstock UV-Rodagon f5.6/60mm + 105mm + 150mm
|
|
| Наверх |
|
 |
Lloydy
 Зарегистрирован: 02.09.2009 Сообщения: 7880 Откуда: Ironbridge. UK.
Expire: 2022-01-01
|
 Отправлено: Пн Дек 14, 2015 10:04 pm Заголовок сообщения: |
|
 Отправлено: Пн Дек 14, 2015 10:04 pm Заголовок сообщения: |
|
|
Lloydy wrote:
MEK, mentioned in the data sheet, is easily available from most plumbing and building merchants as it is the solvent used to clean PVC pipework before gluing. Be very careful, it is very nasty stuff. Not only to the user, it will strip paint. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Наверх |
|
 |
kuuan
 Зарегистрирован: 14.01.2008 Сообщения: 4569 Откуда: right now: Austria
Expire: 2014-12-26
|
 Отправлено: Вс Дек 20, 2015 6:49 am Заголовок сообщения: |
|
 Отправлено: Вс Дек 20, 2015 6:49 am Заголовок сообщения: |
|
|
kuuan wrote:
| kuuan писал(а): |
...
- the lens that could benefit most from re-coating is an M-Rokkor 2.8/28 that had the known 'white spots', they had gone beyond the rim and had corrupted the coating on the whole surface. It was rather unusable as it was, I took the effort and had removed / polished that bad coating already. Sharpness is much improved, but it glows badly and remains rather unusable... |
to put the record straight: By now, without re-coating, my M-Rokkor 2.8/28 is performing quite well. Clarity and sharpness had been improved decisively after polishing, now finally I repainted the outer rim of the lens more thoroughly and that strongly reduced blooming.
I believe that it may still bloom a bit more than a perfect copy should and that it would benefit from re-coating, but it has become quite usable again, see: http://forum.mflenses.com/viewtopic,p,1461435.html#1461435 _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|