MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

Minolta MD ROKKOR 1.4 50MM Fungus
Предыдущая тема :: Следующая тема  


Reply

Hi, I have just bought this lens knowing that it had some degree of fungus, however the fungus is inside the front element group, my question is has anyone opened this sealed group to clean inside, if so please advise method.

These pics show the encapsulated front element design, in the second photo there are 6 x pins that look like they are small rivets.



Последний раз редактировалось tileman Вс Сен 18, 2016 8:35 am; всего правок: 1


Reply

The photos displayed OK in the Post preview, but not when I had submitted the Post, I did a reply asking what was wrong and the photos were there, I deleted the reply and they were gone again.
Help please.


Reply

tileman писал(а):
The photos displayed OK in the Post preview, but not when I had submitted the Post, I did a reply asking what was wrong and the photos were there, I deleted the reply and they were gone again.
Help please.

Default forum behaviour designed to fight spam.

As for the fungus problem, I don't think it's worth it or even possible to open this unit. Or maybe you can open it, but then you won't be able to put it back together without specialist tools. I have a 50/2.0 with the same problem (similar construction) and gave up trying to fix it...


Reply

Cheers Miran, you are probably correct, I don't think the fungus is bad enough to affect images, but I will know when the adaptor comes.


Reply

Surely someone has stripped one of these lens groups on this very popular lens that is prone to fungus.


Reply

May be someone did, but the reality is that people who are capable of doing quality work on lenses also know what to stay away from.


Reply

Those six rivets would probably be spun rather than hammered / pressed to secure them, and more than likely all six would be spun together in a machine with six spinning heads to ensure they pull down evenly. And there's less likelihood of operator error in the manufacturing process. I worked in a factory for a short time where they made time switches, and the tiny motor casings were riveted in this manner to ensure they went together evenly.
I really wouldn't take it apart unless you have the right tools and skills to put it back together. Although modern industrial adhesives might be good enough to do away with the rivets?


Reply

Lloydy писал(а):
Those six rivets would probably be spun rather than hammered / pressed to secure them, and more than likely all six would be spun together in a machine with six spinning heads to ensure they pull down evenly. And there's less likelihood of operator error in the manufacturing process. I worked in a factory for a short time where they made time switches, and the tiny motor casings were riveted in this manner to ensure they went together evenly.
I really wouldn't take it apart unless you have the right tools and skills to put it back together. Although modern industrial adhesives might be good enough to do away with the rivets?


Cheers Lloydy, the fungus isn't too bad and certainly doesn't affect the images, not that I can see anyway, I just like my kit to be in top condition.


Reply

Lloydy писал(а):
Those six rivets would probably be spun rather than hammered / pressed to secure them, and more than likely all six would be spun together in a machine with six spinning heads to ensure they pull down evenly. And there's less likelihood of operator error in the manufacturing process. I worked in a factory for a short time where they made time switches, and the tiny motor casings were riveted in this manner to ensure they went together evenly.
I really wouldn't take it apart unless you have the right tools and skills to put it back together. Although modern industrial adhesives might be good enough to do away with the rivets?


Aren't such units laser heat-welded? I have seen it done with knives scales, after such welding I was told they are permanently attached. I have two groups like these as well, I tried to puncture one at a lens junction point I made two holes, pouring inside cleaning liquid with a needle.

Alas I ended up scratching one lens due to poor handling of the needle, such groups stupid assembly ends up making me nervous so I didn't act with the usual prudence.

It surely is a cost saving measure but a repair implies substitution.