| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
Orio
Зарегистрирован: 24.02.2007 Сообщения: 29545 Откуда: West Emilia
Expire: 2012-12-04
|
 Отправлено: Сб Июн 14, 2008 12:39 pm Заголовок сообщения: Dealing with noise with Epson 4490 |
|
 Отправлено: Сб Июн 14, 2008 12:39 pm Заголовок сообщения: Dealing with noise with Epson 4490 |
|
|
Orio wrote:
I have made a test of scanning a slide with Epson 4490 using three methods.
1) Noise reducer in scanning interface
2) ICE + ninja in photoshop
3) normal + ninja in photoshop
here's my results:
Full image resized:
Noise reducer in scanning interface, at lowest setting:
ICE + ninja in photoshop (to try remove ICE artifacts):
normal scanning(no tricks) + ninja in photoshop:
For me, normal scanning + ninja is clear winner.
It leaves some noise (on purpose, I reduced effect amount) but it preserve some minimum sharpness)
Noise reduction in the scanning interface is too blurring even at the lowest setting.
ICE creates some ugly artifacts, which I tried to remove with ninja but without much result (you can still see them).
- _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Наверх |
|
 |
Orio
Зарегистрирован: 24.02.2007 Сообщения: 29545 Откуда: West Emilia
Expire: 2012-12-04
|
 Отправлено: Сб Июн 14, 2008 12:46 pm Заголовок сообщения: |
|
 Отправлено: Сб Июн 14, 2008 12:46 pm Заголовок сообщения: |
|
|
Orio wrote:
Addition: I should perhaps try once more by using built-in scanner noise reducer, bu tthis time increasing the built-in sharpness also (I left it at minimum in the above test).
Perhaps lowest noise reducer + medium sharpness could work better. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Наверх |
|
 |
maddog10
 Зарегистрирован: 08.04.2008 Сообщения: 1072 Откуда: Maryland, USA
Expire: 2015-02-12
|
 Отправлено: Сб Июн 14, 2008 12:48 pm Заголовок сообщения: |
|
 Отправлено: Сб Июн 14, 2008 12:48 pm Заголовок сообщения: |
|
|
maddog10 wrote:
I agree with you conclusions, based on the photos you have shown. _________________ Michael Hill |
|
| Наверх |
|
 |
lulalake
 Зарегистрирован: 22.04.2007 Сообщения: 1191 Откуда: Near Austin Texas
Expire: 2011-11-18
|
 Отправлено: Сб Июн 14, 2008 2:58 pm Заголовок сообщения: |
|
 Отправлено: Сб Июн 14, 2008 2:58 pm Заголовок сообщения: |
|
|
lulalake wrote:
Orio, I mentioned this in another post but you may be having more film grain issues as opposed to scanner noise issues. My experience is that the best film to scan is the finest grain film available.
Jules |
|
| Наверх |
|
 |
Schnauzer
 Зарегистрирован: 09.04.2008 Сообщения: 2155 Откуда: Maine, USA
Expire: 2012-03-08
|
 Отправлено: Сб Июн 14, 2008 4:08 pm Заголовок сообщения: |
|
 Отправлено: Сб Июн 14, 2008 4:08 pm Заголовок сообщения: |
|
|
Schnauzer wrote:
What do you reccomend for film for all around use Jules? _________________ Ron |
|
| Наверх |
|
 |
lulalake
 Зарегистрирован: 22.04.2007 Сообщения: 1191 Откуда: Near Austin Texas
Expire: 2011-11-18
|
 Отправлено: Сб Июн 14, 2008 8:27 pm Заголовок сообщения: |
|
 Отправлено: Сб Июн 14, 2008 8:27 pm Заголовок сообщения: |
|
|
lulalake wrote:
| Schnauzer писал(а): |
| What do you reccomend for film for all around use Jules? |
B&W, Ilford FP4+ (My favorite) or any fine grain film.
Color, most pro films, Portra, Astia, Velvia, Reala are all good fineer grain films. Expensive, but the best quality you can get. |
|
| Наверх |
|
 |
naplam
 Зарегистрирован: 22.03.2007 Сообщения: 480 Откуда: Spain
Expire: 2013-11-30
|
 Отправлено: Сб Июн 14, 2008 10:15 pm Заголовок сообщения: |
|
 Отправлено: Сб Июн 14, 2008 10:15 pm Заголовок сообщения: |
|
|
naplam wrote:
Orio, maybe a test with a fine grain B/W film would be interesting in order to use it as the "base" situation and then trying with colour and more grainy films. |
|
| Наверх |
|
 |
Orio
Зарегистрирован: 24.02.2007 Сообщения: 29545 Откуда: West Emilia
Expire: 2012-12-04
|
 Отправлено: Сб Июн 14, 2008 10:38 pm Заголовок сообщения: |
|
 Отправлено: Сб Июн 14, 2008 10:38 pm Заголовок сообщения: |
|
|
Orio wrote:
I had to use a 400 ISO in that situation because it was January mid afternoon and cloudy waether, so nearly zero ambient light available.
Of course using a velvia 50 will give better results (I already tried), but my goal here was exactly to find the most effective way to deal with grainy film.
- _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|