| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
DConvert
 Зарегистрирован: 12.06.2010 Сообщения: 984 Откуда: Essex UK
|
 Отправлено: Чт Фев 15, 2018 2:51 pm Заголовок сообщения: Adapter accuracy (or not)! |
|
 Отправлено: Чт Фев 15, 2018 2:51 pm Заголовок сообщения: Adapter accuracy (or not)! |
|
|
DConvert wrote:
During lunchtime today I tested out one of my recent job lot of lenses on the adapter that arrived last night.
The Lenses' focus seemed a bit off at 70mm... & WAY off at 28mm.
On getting back to the office I checked the spacing provided by the adapter. As suspected it was more than a bit out!
Internet sources I've seen quote the flange distance of the Minolta SR/MD/MC mount as either 43.5mm or 43.72mm.
So the adapter to go to MFT should be 24.75mm or a bit more if the longer measurement is right.
My calipers make this adapter 23.4mm which is well over a millimeter out
I've had other adapters that arrived slightly out on length, but never previously to this extreme.
What are the largest adapter errors you've seen? |
|
| Наверх |
|
 |
calvin83
 Зарегистрирован: 12.04.2009 Сообщения: 7740 Откуда: Hong Kong
|
 Отправлено: Пн Фев 19, 2018 4:35 pm Заголовок сообщения: |
|
 Отправлено: Пн Фев 19, 2018 4:35 pm Заголовок сообщения: |
|
|
calvin83 wrote:
The largest error will appear when you put the wrong adapter.
P.S. knowing the one with the 'right' thickness is much more useful. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Наверх |
|
 |
cooltouch
 Зарегистрирован: 15.01.2009 Сообщения: 9096 Откуда: Houston, Texas
|
 Отправлено: Пн Фев 19, 2018 8:44 pm Заголовок сообщения: |
|
 Отправлено: Пн Фев 19, 2018 8:44 pm Заголовок сообщения: |
|
|
cooltouch wrote:
I've bought about a dozen adapters from various sources to convert manual focus lenses to my digitals. All of them are accurate at infinity. Most of them are the Chinese Fotga brand. One is Photodiox. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Наверх |
|
 |
DConvert
 Зарегистрирован: 12.06.2010 Сообщения: 984 Откуда: Essex UK
|
 Отправлено: Пн Фев 19, 2018 10:49 pm Заголовок сообщения: |
|
 Отправлено: Пн Фев 19, 2018 10:49 pm Заголовок сообщения: |
|
|
DConvert wrote:
| cooltouch писал(а): |
| I've bought about a dozen adapters from various sources to convert manual focus lenses to my digitals. All of them are accurate at infinity. Most of them are the Chinese Fotga brand. One is Photodiox. |
Strange the worst one I have is a Fotga.
When just using them the errors are not too noticeable with longer lenses, but with a 28mm mounted on this I can't focus as close as 5m.
I've been through my adapters checking the length with calipers/micrometer. Many of the longer ones are about ½mm shorter than they should be. Fortunately the flat type are generally very much closer (my EF-OM adapter is 1.98mm when internet registration measurements put the proper length as 2mm)
At least the inaccurate ones are all two part adapters where one plate can be unscrewed & some shims fitted behind. Perhaps this has already been done with some adapters & I've managed to pick up some that never made it to the end of the production line  |
|
| Наверх |
|
 |
cooltouch
 Зарегистрирован: 15.01.2009 Сообщения: 9096 Откуда: Houston, Texas
|
 Отправлено: Вт Фев 20, 2018 5:05 am Заголовок сообщения: |
|
 Отправлено: Вт Фев 20, 2018 5:05 am Заголовок сообщения: |
|
|
cooltouch wrote:
I've used even 17mm lenses -- two different ones, one with a Canon FD to NEX Fotga and the other with a Nikon F to NEX Fotga, and I was able to achieve infinity focus with both 17s. Knowing very well that Chinese quality control can be very hit or miss, perhaps you just got a bad one. Fortunately, I did not. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Наверх |
|
 |
calvin83
 Зарегистрирован: 12.04.2009 Сообщения: 7740 Откуда: Hong Kong
|
 Отправлено: Вт Фев 20, 2018 7:43 am Заголовок сообщения: |
|
 Отправлено: Вт Фев 20, 2018 7:43 am Заголовок сообщения: |
|
|
calvin83 wrote:
| cooltouch писал(а): |
| I've used even 17mm lenses -- two different ones, one with a Canon FD to NEX Fotga and the other with a Nikon F to NEX Fotga, and I was able to achieve infinity focus with both 17s. Knowing very well that Chinese quality control can be very hit or miss, perhaps you just got a bad one. Fortunately, I did not. |
There is no quality control on the cheapest adapter.  _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Наверх |
|
 |
SXR_Mark
 Зарегистрирован: 12.06.2010 Сообщения: 506 Откуда: England
|
 Отправлено: Сб Фев 24, 2018 10:12 pm Заголовок сообщения: Re: Adapter accuracy (or not)! |
|
 Отправлено: Сб Фев 24, 2018 10:12 pm Заголовок сообщения: Re: Adapter accuracy (or not)! |
|
|
SXR_Mark wrote:
| DConvert писал(а): |
Internet sources I've seen quote the flange distance of the Minolta SR/MD/MC mount as either 43.5mm or 43.72mm.
So the adapter to go to MFT should be 24.75mm or a bit more if the longer measurement is right.
|
I believe the correct register for Minolta is 43.72mm. Micro-4/3 has a register of 19.25mm, so the correct adapter thickness is 24.47mm.
I have 26 m4/3 adapters in my database and the worst are easily the two FOTGA ones. They are so bad I would never buy FOTGA gain. One is a Konica AR adapter and it is 0.95mm too short and the other is M42 and that is 0.71mm too short.
My most consistently accurate adapters are by Fotodiox (2 samples) and Pixco (9 samples). These vary between 0.03mm too short (Fotodiox Pentax PK) and 0.26mm too short (Pixco PK). This last is a rogue since every other one of my Pixco adapters is within 0.15mm of the correct length. While the Fotodiox were very good, I found the Pixco to be nearly as good and a lot cheaper.
My other adapters are either BigIs or have no brand name. They vary between 0.57mm and 0.05mm too short. I have good and bad from BigIs.
It is interesting to observe that I also have a genuine Olympus OM to m4/3 adapter and that is 0.2mm too short. The adapters tend to be made deliberately too short to ensure that the lens will be able to focus at infinity given the inevitable tolerances on camera body, adapter and lens. The problem with ones that are very much too short (like FOTGA) is that the min focus distance with a wide angle lens is badly affected because a lot of the small focus throw on such a lens is wasted in going beyond infinity.
Given the tolerance on the genuine Olympus, I consider anything within 0.2mm to be 'accurate'.
Mark _________________ Olympus OM-D E-M1 for everything |
|
| Наверх |
|
 |
calvin83
 Зарегистрирован: 12.04.2009 Сообщения: 7740 Откуда: Hong Kong
|
 Отправлено: Вс Фев 25, 2018 7:30 am Заголовок сообщения: |
|
 Отправлено: Вс Фев 25, 2018 7:30 am Заголовок сообщения: |
|
|
calvin83 wrote:
I have heard the adapter from K&F Concept has good tolerance. My PB to NEX is ok but not great in terms of thickness. Surprisingly, the thickness of the generic FD to NEX i bought are nearly perfect on my Canon 24/2.8 and Vivitar 135/2.3. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Наверх |
|
 |
kypfer
 Зарегистрирован: 27.09.2017 Сообщения: 616 Откуда: Jersey C.I.
|
 Отправлено: Ср Мар 21, 2018 9:06 am Заголовок сообщения: |
|
 Отправлено: Ср Мар 21, 2018 9:06 am Заголовок сообщения: |
|
|
kypfer wrote:
I am currently in discussion with a foreign retailer about a supplied Pixco PK-NX adaptor, which was described as "retaining infinity focus" (but doesn't) and which appears to be too long by about 0.7mm.
I'm probably flogging a dead horse as he doesn't appear to understand what I'm complaining about (or doesn't want to) and the item in question seems to be out of production  |
|
| Наверх |
|
 |
Sjak
 Зарегистрирован: 29.09.2017 Сообщения: 696
|
 Отправлено: Ср Мар 21, 2018 10:08 am Заголовок сообщения: |
|
 Отправлено: Ср Мар 21, 2018 10:08 am Заголовок сообщения: |
|
|
Sjak wrote:
| kypfer писал(а): |
| I'm probably flogging a dead horse as he doesn't appear to understand what I'm complaining about (or doesn't want to) |
This is often my experience with ebay sellers, regardless of what the item is. In the ad, they present themselves as specialists in what they sell. But once you start to ask specific questions, especially after the sale, they suddenly (conveniently?) seem to suffer from amnesia.
In my cases, the items were either so cheap that it was a gamble anyway and I could happily forget about it, or with more valuable ones, persevering would eventually also result in proper answers/support. |
|
| Наверх |
|
 |
DConvert
 Зарегистрирован: 12.06.2010 Сообщения: 984 Откуда: Essex UK
|
 Отправлено: Ср Мар 21, 2018 2:13 pm Заголовок сообщения: Re: Adapter accuracy (or not)! |
|
 Отправлено: Ср Мар 21, 2018 2:13 pm Заголовок сообщения: Re: Adapter accuracy (or not)! |
|
|
DConvert wrote:
| SXR_Mark писал(а): |
| DConvert писал(а): |
Internet sources I've seen quote the flange distance of the Minolta SR/MD/MC mount as either 43.5mm or 43.72mm.
So the adapter to go to MFT should be 24.75mm or a bit more if the longer measurement is right.
|
I believe the correct register for Minolta is 43.72mm. Micro-4/3 has a register of 19.25mm, so the correct adapter thickness is 24.47mm.
I have 26 m4/3 adapters in my database and the worst are easily the two FOTGA ones. They are so bad I would never buy FOTGA gain. One is a Konica AR adapter and it is 0.95mm too short and the other is M42 and that is 0.71mm too short.
My most consistently accurate adapters are by Fotodiox (2 samples) and Pixco (9 samples). These vary between 0.03mm too short (Fotodiox Pentax PK) and 0.26mm too short (Pixco PK). This last is a rogue since every other one of my Pixco adapters is within 0.15mm of the correct length. While the Fotodiox were very good, I found the Pixco to be nearly as good and a lot cheaper.
My other adapters are either BigIs or have no brand name. They vary between 0.57mm and 0.05mm too short. I have good and bad from BigIs.
It is interesting to observe that I also have a genuine Olympus OM to m4/3 adapter and that is 0.2mm too short. The adapters tend to be made deliberately too short to ensure that the lens will be able to focus at infinity given the inevitable tolerances on camera body, adapter and lens. The problem with ones that are very much too short (like FOTGA) is that the min focus distance with a wide angle lens is badly affected because a lot of the small focus throw on such a lens is wasted in going beyond infinity.
Given the tolerance on the genuine Olympus, I consider anything within 0.2mm to be 'accurate'.
Mark |
Thanks for that, yes anything upto 0.2mm short is generally usable, but I've had a few lenses where I've definitely wanted it closer than that - shimming 2 part adapters it is generally fairly easy to get them to within 0.05mm.
As your experience of brands seems similar to mine I'll do my best to avoid FOTGA ones in future - I've never seen issues with the Pixco ones.
I'm surprised the genuine Olympus one is that far out, all my one piece 3rd party adapters are much closer than that and I've definitely had cheap 2 piece ones that are closer too. |
|
| Наверх |
|
 |
DConvert
 Зарегистрирован: 12.06.2010 Сообщения: 984 Откуда: Essex UK
|
 Отправлено: Ср Мар 21, 2018 2:18 pm Заголовок сообщения: |
|
 Отправлено: Ср Мар 21, 2018 2:18 pm Заголовок сообщения: |
|
|
DConvert wrote:
| Sjak писал(а): |
| kypfer писал(а): |
| I'm probably flogging a dead horse as he doesn't appear to understand what I'm complaining about (or doesn't want to) |
This is often my experience with ebay sellers, regardless of what the item is. In the ad, they present themselves as specialists in what they sell. But once you start to ask specific questions, especially after the sale, they suddenly (conveniently?) seem to suffer from amnesia.
In my cases, the items were either so cheap that it was a gamble anyway and I could happily forget about it, or with more valuable ones, persevering would eventually also result in proper answers/support. |
At least with e-bay you can raise a case get a refund without the supplier needing to understand the issue. E-bays policy is very heavily on the side of the buyer. I'm now reluctant to sell via e-bay as they are so biased towards buyers if any issues arise. |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|