MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

Spotmatic ES mirror issue, Part 57
Предыдущая тема :: Следующая тема  


Reply

Hello all! I have a Spotmatic SE with the “stuck” mirror issue. I have read all of the previous threads on this topic and followed the excellent repair directions but I’m still having issues. Specifically, I have removed the bottom plate, carefully cleaned the cog, lever and assembly, and the camera now fires properly almost all of the time at higher speeds (500 and 1000). However, 1 out of every 20 or so times at higher speeds, the lever will not allow the pin to drop as it should, leaving the mirror stuck. This happens 2 out of 3 times at lower speeds. Any suggestions for what to try next? I have included a picture.

Thank you!



Reply

Houseofgee писал(а):
Hello all! I have a Spotmatic SE with the “stuck” mirror issue. I have read all of the previous threads on this topic and followed the excellent repair directions but I’m still having issues. Specifically, I have removed the bottom plate, carefully cleaned the cog, lever and assembly, and the camera now fires properly almost all of the time at higher speeds (500 and 1000). However, 1 out of every 20 or so times at higher speeds, the lever will not allow the pin to drop as it should, leaving the mirror stuck. This happens 2 out of 3 times at lower speeds. Any suggestions for what to try next? I have included a picture.

Thank you!



Reply

Thank you, Edgar. I’m not sure happened to the pic on my first post.


Reply

Houseofgee писал(а):
Thank you, Edgar. I’m not sure happened to the pic on my first post.



You can't post images or links in your first post, an anti-spam measure. You'll be ok from now on.

Welcome to the forum by the way! Someone should be along who may be able to help.


Reply

Thanks!


Reply

Welcome Houseofgee

(No photos or links in first post is anti-spam protection)