MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

Tokina 17mm 3.5 disassemble ?
Предыдущая тема :: Следующая тема  


Reply

Hi folks,
I scored this nice lens cheaply with a little fungus inside the front element and some haze further back.
Has anyone actually opened one up for a clean?
I would appreciate any tips please.
( I searched here )
cheers
Pete in NZ


Reply

First, a question. What tools specific to lens repair do you own?

Because you're gonna need the right tools before you begin.


Reply

cooltouch писал(а):
First, a question. What tools specific to lens repair do you own?

Because you're gonna need the right tools before you begin.

Thanks Smile
I've got one of these, sets of precision screw drivers and my friend has threatened to lend me various rubber bungs
for the front trim ring.


Reply

Good. I don't own a Tokina 17mm, so I'm assuming things here.

First, since you mentioned that there is "stuff" behind the first element, it will need to be removed. Look for a slotted retainer ring around the first element. You'll want to locate the two bladed ends of your lens spanner in the slots of that ring. Then, applying an even pressure on the spanner, unscrew the ring. You need to be very careful when doing this because you don't want the spanner to slip out of the slots because it will mark the front element if this happens.

Once the ring has been removed, the front element will fall out. Make a note or take a pic to indicate which surface is the outer surface because the lens may not be convex on both surfaces. Do whatever cleaning is necessary to it. Also, chances are you'll find another slotted retainer ring behind the front element. This will have to be removed to continue on toward the inner element(s) with more "stuff" on it/them.

Continue in this fashion. That's about all I know to recommend at this point.


Reply

The lens is difficult to work on, i have the Vivitar version, it s not a lens for begginers!


Reply

cooltouch писал(а):
Good. I don't own a Tokina 17mm, so I'm assuming things here.

.....

Thanks Michael
My friend called and we got the front and back groups out easily and carefully.
Both groups have several elements screwed in a stack.
Looks like alcohol or nail polish remover will be needed for the obvious glue.
Then some form of clamp like these jobs or maybe I can knock up a couple of tiny strap wrenches...[/img]

The haze and fungus looks pretty minor


Последний раз редактировалось Transit Пт Май 26, 2017 9:14 am; всего правок: 2


Reply

tomasg писал(а):
The lens is difficult to work on, i have the Vivitar version, it s not a lens for begginers!

Thanks tomasg
God willing we can sort it Smile
cheers


Reply

I am also interested in any tutorial or video showing the disassembly of this lens. Mine has haze and I would like to get rid of.


Reply

I managed servicing this lens. The video is quite long and the framing is so so, 14 minutes but is not cut nor edited.

Hope it will help someone.

The lens is sharp but you need to watch field curvature.

https://youtu.be/MeoQl8hXCzU


Reply

Fantastic thank-you.
You have spurred me into action 😀