| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
alex_d
 Зарегистрирован: 19.01.2019 Сообщения: 553
|
 Отправлено: Сб Сен 12, 2020 9:27 am Заголовок сообщения: Hacking Fujis 801 exposure ring |
|
 Отправлено: Сб Сен 12, 2020 9:27 am Заголовок сообщения: Hacking Fujis 801 exposure ring |
|
|
alex_d wrote:
as the title,
any known hack to use other M42 lenses but without pressing dof button together with the shutter button ..
quite annoying and slow handling
I knew I will be sorry at one point for removing that tab from lenses ... |
|
| Наверх |
|
 |
eddieitman
 Зарегистрирован: 12.04.2011 Сообщения: 1246 Откуда: United Kingdom
|
 Отправлено: Вс Сен 13, 2020 6:45 am Заголовок сообщения: |
|
 Отправлено: Вс Сен 13, 2020 6:45 am Заголовок сообщения: |
|
|
eddieitman wrote:
What camera you using it on? if something like an E mount or Fuji /M43 cut a groove in to an M42 adaptor so that it sits inside it _________________ My web site www.digital-darkroom.weebly.com
Life is like a camera. Focus on what's important, capture the good times, develop from the negatives and if things don't work out, just take another shot. |
|
| Наверх |
|
 |
kypfer
 Зарегистрирован: 27.09.2017 Сообщения: 616 Откуда: Jersey C.I.
|
 Отправлено: Вс Сен 13, 2020 8:25 am Заголовок сообщения: Re: Hacking Fujis 801 exposure ring |
|
 Отправлено: Вс Сен 13, 2020 8:25 am Заголовок сообщения: Re: Hacking Fujis 801 exposure ring |
|
|
kypfer wrote:
| alex_d писал(а): |
as the title,
any known hack to use other M42 lenses but without pressing dof button together with the shutter button ..
quite annoying and slow handling
I knew I will be sorry at one point for removing that tab from lenses ... |
The only option I can think of is to use a Fujica AX5 35mm film body with the 'XD' adaptor fitted. This will allow the use of any auto-aperture M42 lens with open-aperture metering in 'Program' and 'Shutter priority' modes! Possibly the only camera ever to offer this functionality
A couple of things to note :-
i) Only the XD adaptor in the AX5 has this functionality, not the XS adaptor nor any other model camera in the range.
ii) The shutter in the AX5 (and others) is electronically controlled. The calibration is performed by fitting very low-value (difficult to find) capacitors, which have a tendency to fail and need replacing.
iii) The shutter in the AX5 (and others) gets "tired" eventually and is not reliable at high speeds. A clean/service may restore functionality, but re-calibration may be required ... see ii) above
This is all from personal experience. I used an AX5 for many years, primarily to take advantage of the widely available high-quality screw-fit primes that had become totally unfashionable in the '80's and '90's
The removal of the 'tab' on the aperture ring of the Fujinon lenses doesn't affect this functionality on the AX5 with adaptor, but of course limits it's use if ever you want to revert to the ST801. I bit the bullet and filed the tabs on all my Fujinons (and glued in the pin) so's I can use them easily on my Pentax DSLR's.
Good luck  |
|
| Наверх |
|
 |
alex_d
 Зарегистрирован: 19.01.2019 Сообщения: 553
|
 Отправлено: Пн Сен 14, 2020 8:27 am Заголовок сообщения: |
|
 Отправлено: Пн Сен 14, 2020 8:27 am Заголовок сообщения: |
|
|
alex_d wrote:
hi, great info !
ax5 is quite rare camera and this ring even more rare. i have already xs ring but you say it will not work ..
I had also an idea of 'putting back' the tab but I havent found the right way to do it. super glue could do the trick but also can make a lot of mess on the lens. JB Weld / epoxy thing maybe even better, shaping and leave it 24h to dry
Thanx |
|
| Наверх |
|
 |
kypfer
 Зарегистрирован: 27.09.2017 Сообщения: 616 Откуда: Jersey C.I.
|
 Отправлено: Пн Сен 14, 2020 1:58 pm Заголовок сообщения: |
|
 Отправлено: Пн Сен 14, 2020 1:58 pm Заголовок сообщения: |
|
|
kypfer wrote:
| alex_d писал(а): |
hi, great info !
ax5 is quite rare camera and this ring even more rare. i have already xs ring but you say it will not work ..
I had also an idea of 'putting back' the tab but I havent found the right way to do it. super glue could do the trick but also can make a lot of mess on the lens. JB Weld / epoxy thing maybe even better, shaping and leave it 24h to dry
Thanx |
Can't help further, sorry. I had two XD adaptors and sold them on eBay about three years ago, along with a bunch of other accessories, when I was clearing out the "toy box" to make room for more "stuff"
The AX5 bodies I had went the way of all good things and were disposed of when I moved over to Pentax, about 20 years ago. |
|
| Наверх |
|
 |
alex_d
 Зарегистрирован: 19.01.2019 Сообщения: 553
|
 Отправлено: Ср Сен 16, 2020 7:06 pm Заголовок сообщения: |
|
 Отправлено: Ср Сен 16, 2020 7:06 pm Заголовок сообщения: |
|
|
alex_d wrote:
it's all good, got me today as new 28/3.5 with the tab on, so now I have 28 and 55.
I'll see the way of gluing something to other lenses to recover the tab
thanx |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|