| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
marcusBMG
 Зарегистрирован: 07.12.2012 Сообщения: 1392 Откуда: Conwy N Wales
|
 Отправлено: Пт Окт 24, 2014 11:02 pm Заголовок сообщения: Soligor 180mm 3.5 loose mount .... FIXED |
|
 Отправлено: Пт Окт 24, 2014 11:02 pm Заголовок сообщения: Soligor 180mm 3.5 loose mount .... FIXED |
|
|
marcusBMG wrote:
i have just acquired this lens, its the chrome eared version 8xxx serial. problems: loose mount section, oily blades. Not clear how to disassemble this one. so far by loosening the grub screws on the focus ring I have managed to lose infinity focus...
There is another screw that I think provides access to a screw under the focus ring. No screws at the mount end.
Any ideas?
 _________________ pentax ME super (retired)
Pentax K3-ii; pentax K-S2; Samsung NX 20; Lumix G1 + adapters;
Adaptall collection (proliferating!) inc 200-500mm 31A, 300mm f2.8, 400mm f4.
Primes: takumar 55mm; smc 28mm, 50mm; kino/komine 28mm f2's, helios 58mm, Tamron Nestar 400mm, novoflex 400mm, Vivitar 135mm close focus, 105mm macro; Jupiter 11A; CZJ 135mm.
A classic zoom or two: VS1 (komine), Kiron Zoomlock...
Последний раз редактировалось marcusBMG Ср Окт 29, 2014 5:39 pm; всего правок: 2 |
|
| Наверх |
|
 |
kansalliskala
 Зарегистрирован: 19.07.2007 Сообщения: 5122 Откуда: Southern Finland countryside
Expire: 2016-12-30
|
 Отправлено: Сб Окт 25, 2014 8:27 am Заголовок сообщения: |
|
 Отправлено: Сб Окт 25, 2014 8:27 am Заголовок сообщения: |
|
|
kansalliskala wrote:
I think I have the same lens and same looseness problem. That one is missing the T-adapter, right? _________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| Наверх |
|
 |
marcusBMG
 Зарегистрирован: 07.12.2012 Сообщения: 1392 Откуда: Conwy N Wales
|
 Отправлено: Сб Окт 25, 2014 11:25 am Заголовок сообщения: |
|
 Отправлено: Сб Окт 25, 2014 11:25 am Заголовок сообщения: |
|
|
marcusBMG wrote:
Yes I left off the t-mount for the pic.
Looking at the mount end there is a ring with two small holes in that look like they are for a custom spanner. It looks a bit like a bearing housing .. ?? _________________ pentax ME super (retired)
Pentax K3-ii; pentax K-S2; Samsung NX 20; Lumix G1 + adapters;
Adaptall collection (proliferating!) inc 200-500mm 31A, 300mm f2.8, 400mm f4.
Primes: takumar 55mm; smc 28mm, 50mm; kino/komine 28mm f2's, helios 58mm, Tamron Nestar 400mm, novoflex 400mm, Vivitar 135mm close focus, 105mm macro; Jupiter 11A; CZJ 135mm.
A classic zoom or two: VS1 (komine), Kiron Zoomlock... |
|
| Наверх |
|
 |
guardian
 Зарегистрирован: 18.03.2009 Сообщения: 1750
|
 Отправлено: Сб Окт 25, 2014 12:01 pm Заголовок сообщения: |
|
 Отправлено: Сб Окт 25, 2014 12:01 pm Заголовок сообщения: |
|
|
guardian wrote:
Looseness between lens sections, including the mount, is something that's plagued me in the past. Sorry, I've no fix. I did post on this a while back, here:
http://forum.mflenses.com/broken-back-lenses-t65367,highlight,%2Bbroken+%2Bback.html
Doubt there's any help for you there. But you might want to read the thread anyway, just on background. |
|
| Наверх |
|
 |
marcusBMG
 Зарегистрирован: 07.12.2012 Сообщения: 1392 Откуда: Conwy N Wales
|
 Отправлено: Пн Окт 27, 2014 10:12 pm Заголовок сообщения: Progress! |
|
 Отправлено: Пн Окт 27, 2014 10:12 pm Заголовок сообщения: Progress! |
|
|
marcusBMG wrote:
I have now figured out:
1. fully extend the lens
2. loosen/remove the 3 grub screws on the focus sleeve and the sleeve can be pushed up exposing the three yellow screws one of which is circled in red.
Tightening these screws should fix the loose mount kansalliskala, guardian. Now I have to figure out how to separate the helicoid to clean it and the iris. There is leaking gunk all around the iris housing.
 _________________ pentax ME super (retired)
Pentax K3-ii; pentax K-S2; Samsung NX 20; Lumix G1 + adapters;
Adaptall collection (proliferating!) inc 200-500mm 31A, 300mm f2.8, 400mm f4.
Primes: takumar 55mm; smc 28mm, 50mm; kino/komine 28mm f2's, helios 58mm, Tamron Nestar 400mm, novoflex 400mm, Vivitar 135mm close focus, 105mm macro; Jupiter 11A; CZJ 135mm.
A classic zoom or two: VS1 (komine), Kiron Zoomlock...
Последний раз редактировалось marcusBMG Ср Окт 29, 2014 2:54 pm; всего правок: 1 |
|
| Наверх |
|
 |
marcusBMG
 Зарегистрирован: 07.12.2012 Сообщения: 1392 Откуда: Conwy N Wales
|
 Отправлено: Вт Окт 28, 2014 10:13 pm Заголовок сообщения: Got this lens sussed |
|
 Отправлено: Вт Окт 28, 2014 10:13 pm Заголовок сообщения: Got this lens sussed |
|
|
marcusBMG wrote:
Here is outline is how to fix a loose mount and access the iris on this soligor.
1. There are no screws on the mount end. There is instead a collar that needs a needle pointed lens spanner to unscrew. However unless there is a problem with the aperture rings there is no need to start disassembling the mount - it detaches as a unit.
2. To do so, locate the grub screw on the lens barrel above the focus sleeve, loosen it and now the front end of the lens can be unscrewed and separated. Note: may take some oomph to get started. Now loosen/remove the 3 grub screws on the focus sleeve, and a larger stop screw. The sleeve can now be slid up and off. The mount end is attached with 3 brass slotted screws. It is normally these screws that are loose if the mount is wobbly. Remove these and detach the mount.
3. To separate the helicoid, two wee guide rails are located in two slots. Remove these - 2 screws per rail. The helicoid can now be unscrewed completely. To clean the iris I removed the rear element and douched the whole assembly in solvent.
4. Reassembly is a simple reversal. To re-engage the helicoid I used the guide rail positions to align it, lining up with the slots. Resetting infinity focus was no problem. _________________ pentax ME super (retired)
Pentax K3-ii; pentax K-S2; Samsung NX 20; Lumix G1 + adapters;
Adaptall collection (proliferating!) inc 200-500mm 31A, 300mm f2.8, 400mm f4.
Primes: takumar 55mm; smc 28mm, 50mm; kino/komine 28mm f2's, helios 58mm, Tamron Nestar 400mm, novoflex 400mm, Vivitar 135mm close focus, 105mm macro; Jupiter 11A; CZJ 135mm.
A classic zoom or two: VS1 (komine), Kiron Zoomlock... |
|
| Наверх |
|
 |
D1N0
 Зарегистрирован: 07.08.2012 Сообщения: 2726
|
 Отправлено: Пн Сен 19, 2022 1:14 pm Заголовок сообщения: |
|
 Отправлено: Пн Сен 19, 2022 1:14 pm Заголовок сообщения: |
|
|
D1N0 wrote:
Fixing the loose mount went well, Thanks. Mine isn't a T-mount Just M42 attached with three grub screws, no T-thread under there. _________________ pentaxian |
|
| Наверх |
|
 |
philslizzy
 Зарегистрирован: 07.08.2012 Сообщения: 4753 Откуда: Cheshire, England
|
 Отправлено: Пн Сен 19, 2022 11:23 pm Заголовок сообщения: |
|
 Отправлено: Пн Сен 19, 2022 11:23 pm Заголовок сообщения: |
|
|
philslizzy wrote:
| D1N0 писал(а): |
| Fixing the loose mount went well, Thanks. Mine isn't a T-mount Just M42 attached with three grub screws, no T-thread under there. |
That will be a T mount (or T1) T2 had the screw. Some soviet lenses have a T1 mount like the Tair FS 300mm _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|