MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

Bronica ETRC
Предыдущая тема :: Следующая тема  


Reply

A couple of questions about a Bronica ETRC.

Will the film insert from an ETRS back fit inside the ETRC?

Why won't the trigger on the speed grip E always fire? Can it be adjusted?


Reply

camera-wiki.org/wiki/Bronica_ETR#Backs_and_inserts

The inserts interchange according to the above.

Not too sure about the speed grip not releasing the shutter.
My experience was with the SQ-A which used a similar mechanical interface for shutter release. Make sure the grip is securely threaded on to the base of the body. Slight looseness there will prevent the release mechanism from making full contact.

-D.S.


Reply

Doc Sharptail писал(а):
camera-wiki.org/wiki/Bronica_ETR#Backs_and_inserts

The inserts interchange according to the above.

Not too sure about the speed grip not releasing the shutter.
My experience was with the SQ-A which used a similar mechanical interface for shutter release. Make sure the grip is securely threaded on to the base of the body. Slight looseness there will prevent the release mechanism from making full contact.

-D.S.


Thank you for that. I think I solved the trigger problem