| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
miki11
Зарегистрирован: 19.12.2025 Сообщения: 4
|
 Отправлено: Пт Дек 19, 2025 10:14 pm Заголовок сообщения: Problem with unscrewing the lens ring on the Canon FD 35-70 |
|
 Отправлено: Пт Дек 19, 2025 10:14 pm Заголовок сообщения: Problem with unscrewing the lens ring on the Canon FD 35-70 |
|
|
miki11 wrote:
I have a Canon FD 35-70 SSC lens on my table. The problem is that the zoom mechanism rollers are damaged and one lens is dirty. Specifically, it is the last lens of the front optical block. There is fogging inside, and I cannot unscrew the rear ring (applying a minimal amount of acetone to the thread does not help). The manufacturer probably used some kind of “glue” to prevent spontaneous unscrewing. After many years, this agent has glued hard the thread, which makes it difficult to unscrew. At least that's what I suspect.
Can you suggest an effective way to unscrew this ring? I don't want to ruin this fine lens. For now, I consider heating it in the oven to be a last resort.
I am attaching photos of the entire group (without the front lens, which is removed separately, first).
https://www.photrio.com/forum/attachments/dscf6684-jpg.413976/
https://www.photrio.com/forum/attachments/dscf6694-jpg.413977/ |
|
| Наверх |
|
 |
visualopsins
 Зарегистрирован: 05.03.2009 Сообщения: 11698 Откуда: California
Expire: 2027-07-11
|
 Отправлено: Пт Дек 19, 2025 10:44 pm Заголовок сообщения: |
|
 Отправлено: Пт Дек 19, 2025 10:44 pm Заголовок сообщения: |
|
|
visualopsins wrote:
Welcome miki11
Other folks will be along shortly with real answers; probably using a drop or two of some sort of solvent on the ring, being especially careful to avoid getting any on the edges of cemented lens elements. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Наверх |
|
 |
stevemark
 Зарегистрирован: 29.04.2011 Сообщения: 5509 Откуда: Switzerland
|
 Отправлено: Пт Дек 19, 2025 11:22 pm Заголовок сообщения: |
|
 Отправлено: Пт Дек 19, 2025 11:22 pm Заголовок сообщения: |
|
|
stevemark wrote:
| visualopsins писал(а): |
Welcome miki11
Other folks will be along shortly with real answers; probably using a drop or two of some sort of solvent on the ring, being especially careful to avoid getting any on the edges of cemented lens elements. |
There are no cemented lenses in the entire FD 2.8-3.5/35-70mm SSC; therefore I would try to immerse the block for some time in a solvent like acetone. Sometimes it takes a few minutes (or even half an hour) to loosen the elements. I'm pretty sute that this should work - unless the element was factory sealed with an epoxy resin: That would require careful heating indeed.
S _________________ www.artaphot.ch |
|
| Наверх |
|
 |
miki11
Зарегистрирован: 19.12.2025 Сообщения: 4
|
 Отправлено: Сб Дек 20, 2025 12:43 pm Заголовок сообщения: |
|
 Отправлено: Сб Дек 20, 2025 12:43 pm Заголовок сообщения: |
|
|
miki11 wrote:
| stevemark писал(а): |
| visualopsins писал(а): |
Welcome miki11
Other folks will be along shortly with real answers; probably using a drop or two of some sort of solvent on the ring, being especially careful to avoid getting any on the edges of cemented lens elements. |
There are no cemented lenses in the entire FD 2.8-3.5/35-70mm SSC; therefore I would try to immerse the block for some time in a solvent like acetone. Sometimes it takes a few minutes (or even half an hour) to loosen the elements. I'm pretty sute that this should work - unless the element was factory sealed with an epoxy resin: That would require careful heating indeed.
S |
Yes, this zoom lens has 10 lenses in 10 groups. The front block contains 5 separate lenses, and the one that is dirty is the fifth one (counting from the front).
After two days of gently soaking the thread with acetone, I finally managed to unscrew the ring last night. I tried to clean it (with hydrogen peroxide, IPA - 99% isopropyl alcohol, Zeiss optics cleaner), but unfortunately I couldn't remove the artifact. I immersed the entire element in IPA for 10 hours, but that didn't help either. Here is the result after today's inspection.
https://www.photrio.com/forum/attachments/dscf6695-jpg.414018/
What agent can help me remove this “haze” without risking damage to the coatings? |
|
| Наверх |
|
 |
stevemark
 Зарегистрирован: 29.04.2011 Сообщения: 5509 Откуда: Switzerland
|
 Отправлено: Пн Июн 08, 2026 6:41 pm Заголовок сообщения: |
|
 Отправлено: Пн Июн 08, 2026 6:41 pm Заголовок сообщения: |
|
|
stevemark wrote:
| miki11 писал(а): |
After two days of gently soaking the thread with acetone, I finally managed to unscrew the ring last night. I tried to clean it (with hydrogen peroxide, IPA - 99% isopropyl alcohol, Zeiss optics cleaner), but unfortunately I couldn't remove the artifact. I immersed the entire element in IPA for 10 hours, but that didn't help either. Here is the result after today's inspection.
https://www.photrio.com/forum/attachments/dscf6695-jpg.414018/
What agent can help me remove this “haze” without risking damage to the coatings? |
I have encountered this kind of damage on two lenses - on the front lenses of a Mamiya Sekor C 4/210mm and the front lenses of a Pettri 4/200mm. I suspect the surface is etched by some aggessive chemicals either from the lens barrel or from the surroundings. Probably the only way to improve the situation would be re-polishing the lens surface (e. g. with cerium oxide powder).
S _________________ www.artaphot.ch |
|
| Наверх |
|
 |
visualopsins
 Зарегистрирован: 05.03.2009 Сообщения: 11698 Откуда: California
Expire: 2027-07-11
|
 Отправлено: Пн Июн 08, 2026 8:25 pm Заголовок сообщения: |
|
 Отправлено: Пн Июн 08, 2026 8:25 pm Заголовок сообщения: |
|
|
visualopsins wrote:
Try pure soap and water. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Наверх |
|
 |
stevemark
 Зарегистрирован: 29.04.2011 Сообщения: 5509 Откуда: Switzerland
|
 Отправлено: Вт Июн 09, 2026 4:01 pm Заголовок сообщения: |
|
 Отправлено: Вт Июн 09, 2026 4:01 pm Заголовок сообщения: |
|
|
stevemark wrote:
| visualopsins писал(а): |
| Try pure soap and water. |
Polishing - or just washing?
I case of the two lenses I mentioned above (Mamiya Sekor C 4/210 and Petri 4/200) the lens surfaces clearly are damaged; simply washing didn't result in any improvement.
Many years ago Zeiss Oberkochen seems to have promoted using cigarette ash for polishing:
https://richardhaw.com/2020/12/13/repair-polishing-glass-part-1/
Not sure whether that's a urban legend, though ...
I haven't tried, but since I have some smoker friends I should aks them for some ash ...
S _________________ www.artaphot.ch |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|