MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

M42 to EOS 100 adapter problem
Предыдущая тема :: Следующая тема  


Reply

Hi! I have been using a zenit EM and M42 lenses for a while and decided to switch to a camera which would measure light more accuratly, have a larger range of speeds etc.
I bought an EOS 100 on ebay and a simple adapter (no electronic chip). Unfortunately, whenever I turn the adapter until the small knob on the EOS body is up in the tiny aperture on the adapter, the camera will not take pictures. i.e. if I press the shutter release, the battery sign starts to flash (although the battery is new) and I need to press the shutter release once more for the shutter to shut down. This happens only when the adapter is turned fully to the left.
I shot one roll of film and although I did not turn the adapter completely to the left, there is only a faint line at the bottom of the negative that has been exposed, for most pictures.
Have I damaged the camera with the adapter ? Have I bought a damaged camera?
I would really appreciate any insight, and I hope that I explained what is going clearly enough!
thanks in advance...


Reply

I don't have this camera but you could try the following:

Remove the adapter completely and see if the shutter fires normally - if it does, you need to check the adapter to see if it's fouling anything on the camera body.

If the shutter still doesn't fire normally:

Check the AF modes - if it's set to Ai Servo focus, try changing it to single shot AF.

Check and disable Cf7 mirror up function if set.

Try it again.

If no luck, mount an EF mount lens on it and see if it works with that.

If not, you may well have a faulty camera - according to Wikipedia, this body can suffer from a sticky shutter.


Reply

Oh... thanks for the quick answer !

I have removed the adapter and just noticed that the shutter sometimes "twists" at low speeds, there is a black substance on it, which I thought was some grease but I have googled about the 'sitcky shutter' and this is one of the symtoms.

the flashing battery problem seems now to occur with the EF lens and both single shot AF and AI servo

I have tried both CF7 set and not set with no success..

I really thought that the adapter had caused the problem... So I guess I need a new camera.

>> I'll try to clean it up, but I'm still no sure about the flashing battery sign and the adapter ...
meanwhile... back to ZENIT Sad


Reply

Hi!

Let me ask a silly question: Have you checked the batteries?
The blinking battery sign happened with my EOS50e as well.
The reason was the battery which was drained too much to power the cam.
As soon as I have used a battery grip with 4 AA rechargables, it worked again.


Reply

Hi Lucispictor,
Did the flashing battery sign seem to appear randomly for you as well ? I have tried both ordinary batteries and rechargeable batteries unsuccessfully... but I don't have a battery grip Smile


Reply

I have an EOS Elan IIe, and it produces this symptom whenever I try shooting any sort of lens with a completely manual attachment -- like a T-mount lens, for example. And yes, I have the camera set for aperture-priority exposure. New battery, too. Don't really understand why it does this, but it's fairly annoying.

Best,

Michael


Reply

Hi friends: i am new member of this learned forum from Lahore Pakistan.i hope to learn more from my colleagues. Reference rvboth and cooltouch problem. I do not have eos 100 or Elan 2 e but if u look inside the lens mount of body u will find a lug . Switch off the camera and with finger nail (if sharp) or tweezer slightly push the lug upside and put a small piece of folded paper below the lug and then mount the M42 with lens and switch on the gear and it should work like own eos lens. Ur film counter will not work but at the end of the roll it will be rewinded by the camera. This practice i did on my EOS1N (two bodies) and 55. Anyhow care must be taken in pushing the lug upside slightly. It will work. Take care and good wishes from this new member from this part of the planet.
IMHO photography is a hobby of innocent people.
Gill


Reply

Hi Gil,

Yes you are right. I have the EOS1 and have the same issue. The "switch" is at about the 10:00 position behind the lens mount. I use a small piece of paper to hold it in the proper position then it works perfectly.

Cheers

Jules


PS. I have been to Amritsar. Your part of the world is very beautiful.


Reply

Gill ! that was so smart, just the smallest piece of paper and things are working perfectly !
I have put a piece of paper to actually hold the thing in place, then tried the adapter and M42 lens on, and it works fantastically. thanks genius !
I also have cleaned the shutter after bob955 pointed out the "stickiness" issue and it no longer twists at low speeds.


Reply

Hi Lulake & rvboth: i am glad to know this help rvboth from whom who has a little knowledge of Photography as compared to Cheers Jules a big name in mailings lists, forums specially (old days) C/Y forum maintained by sefferen a german site. i will not discuss on this learned forum a personal thing. Thanks for the remarks of cheers about this part of the planet and simply convey an old quotation "beauty lies in the eyes of the beholders. U have restricted ur mail otherwise i must have replied in detail. Lahore is half an hour drive from Amristar.