| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
caerwall
 Зарегистрирован: 11.11.2010 Сообщения: 51
|
 Отправлено: Пн Июн 06, 2011 12:10 pm Заголовок сообщения: Mir 10A - Flektogon |
|
 Отправлено: Пн Июн 06, 2011 12:10 pm Заголовок сообщения: Mir 10A - Flektogon |
|
|
caerwall wrote:
Bought a Mir 10A with a fair bit of use but in reasonable condition. The focus worked for a little while but it had a slack take up which felt that it was slipping on the mount (it wasn't). However the focus gave up soon thereafter.
On removing the M42 fitting it is easily seen that the connecting collar between the optical unit drive and the guide slots has come loose.
It is not obvious how I can remove the optical unit to re-attach the grub (set) screws.
Fairly simple repair but I don't want to put my foot in a cow pat.
There are many useful guides on the web put up by most helpful people but I cannot find any for the fairly rare 10A. As the Mir 1V(B) is also a Flektogon design the disassembly should be similar but I cannot find a guide for that more common lens either.
Seems if I master this then I perhaps I can repay my debt to others with a photo-illustrated disassembly guide for the Mir 10A
Any words of wisdom appreciated.
Tom |
|
| Наверх |
|
 |
sichko
 Зарегистрирован: 20.06.2008 Сообщения: 2475 Откуда: South West UK
|
 Отправлено: Пн Июн 06, 2011 12:28 pm Заголовок сообщения: |
|
 Отправлено: Пн Июн 06, 2011 12:28 pm Заголовок сообщения: |
|
|
sichko wrote:
I'm not familiar with the Mir 10A but you mention guide slots. The Mir 1 has only one slot. I suspect that the mechanical constructions of the two lenses are different.
Edit. Can you show us some pictures ? _________________ John |
|
| Наверх |
|
 |
caerwall
 Зарегистрирован: 11.11.2010 Сообщения: 51
|
 Отправлено: Вт Июн 07, 2011 12:05 pm Заголовок сообщения: |
|
 Отправлено: Вт Июн 07, 2011 12:05 pm Заголовок сообщения: |
|
|
caerwall wrote:
John Thanks for your offer - sorry for the delay - I will try and upload some images (first time lucky?)
Tom
[url=http://forum.mflenses.com/userpix/20116/big_3608_R0025180_cr_1.jpg]
Последний раз редактировалось caerwall Ср Июн 08, 2011 3:39 am; всего правок: 1 |
|
| Наверх |
|
 |
caerwall
 Зарегистрирован: 11.11.2010 Сообщения: 51
|
 Отправлено: Вт Июн 07, 2011 12:10 pm Заголовок сообщения: |
|
 Отправлено: Вт Июн 07, 2011 12:10 pm Заголовок сообщения: |
|
|
caerwall wrote:
I have others as you might guess but did not wish to overload.
Tom |
|
| Наверх |
|
 |
sichko
 Зарегистрирован: 20.06.2008 Сообщения: 2475 Откуда: South West UK
|
 Отправлено: Ср Июн 08, 2011 9:22 am Заголовок сообщения: |
|
 Отправлено: Ср Июн 08, 2011 9:22 am Заголовок сообщения: |
|
|
sichko wrote:
Hi Tom. Thanks for the pics. In the first pic (Image 12) you note 3 screws holding the aperture ring. Are you sure that it's the aperture ring and not the focus ring ? If it is the focus ring my instinct would be to remove the screws and the ring. However please note that, although I have serviced many different Russian lenses, I have not dismantled the 10A. _________________ John |
|
| Наверх |
|
 |
caerwall
 Зарегистрирован: 11.11.2010 Сообщения: 51
|
 Отправлено: Ср Июн 08, 2011 10:58 am Заголовок сообщения: |
|
 Отправлено: Ср Июн 08, 2011 10:58 am Заголовок сообщения: |
|
|
caerwall wrote:
Thanks John - no, that part moves with the aperture ring which is the middle ring below it. The very bottom ring is the focus preset limiter which has click stops and most likely a sprung ball bearing mechanism of some description.
The focus ring is the thicker knobbly ring with flats above. In operation the focus ring moves the body over this middle screwed part (attached to aperture ring below) and covers the area including the screws here shown exposed.
I can't help thinking that the body might unscrew into two parts but when I try and do this is it meets with a determined resistance and I do not want to apply undue force unless it is the proper way to do this. Maybe there is a locating stop screw preventing further movement? It certainly feels like it as it moves to the end of it's travel with a definite click-it's-stopped feel. If my theory is right I cannot see how or where access to this screw could be had.
Perhaps even with the locating collar demounted the lens needs it firmly fixed to allow it to be screwed apart? Catch 22?
Looking down from the back of the lens you can see inner and outer lugs that must turn the rear lens element in its mount. On the collar there are some set screws that would probably lock this rear element in place. Therefore it would be possible to remove the rear lens element but would be no closer to removing the driven part that should be attached to the ring with the locating lugs. (seen in Image 7) At present rotating the focus ring will take the lens body up and down the outer (?) helical but not being fixed to the inner part the locating ring just freewheels around it and no focus action is achieved.
I think the solution is relatively simple once the key to finding it has been understood.
Tom |
|
| Наверх |
|
 |
caerwall
 Зарегистрирован: 11.11.2010 Сообщения: 51
|
 Отправлено: Ср Июн 08, 2011 11:14 am Заголовок сообщения: |
|
 Отправлено: Ср Июн 08, 2011 11:14 am Заголовок сообщения: |
|
|
caerwall wrote:
Ah hah!
Maybe the end lens element unscrews and then the set screws are loosened and the inner helical might then screw out?
I don't want to blunder too far until the correct working method is understood as to do the job in the wrong order might make resetting it all quite an exercise.
I surely want to bring out that inner part just a tad so that the locating screws can be tightened and the drive re-inserted - obvious when working normally the locating collar is always within it's enclosing element and the fixing grub screws are always covered and inaccessible.
I have tried turning the inner part by finger pressure from the rear but it feels lock solid and immovable. Presumably even if it were meant to screw out this way the end set screws under the M42 mount would prevent this happening.
Tom |
|
| Наверх |
|
 |
caerwall
 Зарегистрирован: 11.11.2010 Сообщения: 51
|
|
| Наверх |
|
 |
SXR_Mark
 Зарегистрирован: 12.06.2010 Сообщения: 506 Откуда: England
|
 Отправлено: Вт Июл 05, 2011 2:01 pm Заголовок сообщения: |
|
 Отправлено: Вт Июл 05, 2011 2:01 pm Заголовок сообщения: |
|
|
SXR_Mark wrote:
Thank you for taking the time to post such a comprehensive repair guide.
Mark _________________ Olympus OM-D E-M1 for everything |
|
| Наверх |
|
 |
OM
 Зарегистрирован: 15.01.2010 Сообщения: 166 Откуда: Southern England
|
 Отправлено: Вт Июл 05, 2011 2:19 pm Заголовок сообщения: |
|
 Отправлено: Вт Июл 05, 2011 2:19 pm Заголовок сообщения: |
|
|
OM wrote:
| SXR_Mark писал(а): |
Thank you for taking the time to post such a comprehensive repair guide.
Mark |
+1 |
|
| Наверх |
|
 |
caerwall
 Зарегистрирован: 11.11.2010 Сообщения: 51
|
 Отправлено: Вт Июл 05, 2011 11:21 pm Заголовок сообщения: Thanks |
|
 Отправлено: Вт Июл 05, 2011 11:21 pm Заголовок сообщения: Thanks |
|
|
caerwall wrote:
Thanks for the replies
I must confess that I am not so sure that it is a Flektogon design either. Must check.
I thought I might post up my travails as a sort of return contribution as I have been pleased to learn by following the contributions of others who have shown how to repair other lenses. It is very good to get this help.
I noted nothing on the web for this particular lens and a few others that I have and my contribution is mainly on just how to get into the lens I had no real need to touch the lens element or aperture.
With all these things it is best to hasten slowly. I want to improve my skills in this area.
I would rather not have to repair or re-lubricate lenses but it seems to be a hazard of acquiring them. What I have found is that most of the vendors are just vendors and know very little about what they are selling. The all like to say that what they are selling has been checked over by a "repair man" first. However this seems to translate back into their original language as the English equivalent of "I have had a quick look, cleaned the glass, the aperture opens and shuts and the focus drive actually turns". As repair man in my company I pronounce it "fine".
Real repair men are as scarce as hen's teeth the world over.
Some vendors are very precise and careful in their description and only sell genuine gear, others seem to use a form of "purple" texta or ink to gloss over scratches so that they are not so obvious in their ebay images. This particular Mir-10A had a serious dent in the filter ring that had been repaired enough to take the broken edged screw-in lens cover (probably broken when the filter ring was bent). But the vendor had somehow not noticed this when I asked. Despite listing the lens as having been serviced by a "repair man" the guide collar quickly became detached when used.
On electing to fix the lens rather than ship it all they way back to the Ukraine from Australia the vendor was unable to find anyone to give me the very basic instructions on opening up the lens. However like all good salesmen here was a great show over going to get expert advice from here and there that never turned up from one excuse or another.
I guess his repair man had gone on an extended overseas holiday.
I am not unhappy as it has become an educational thing and the lens now seems to work fine. But I am short-listing my reputable sources for the supply of lenses. Life is always a learning experience and sometimes the only way to get experience is to get out there and do it.
Lest I impinge completely on this anonymous person's reputation I note that he supplied me with four lenses in one shipment. Two lenses were in very good order. One was rougher that his description suggested and the Mir10-A had been well used, damaged, repaired and came apart internally as soon as I tried to use it. I doubt if the vendor had anything to do with the repair but whomever had actually repaired it had forgotten to properly tighten the set screws on the guide collar.
I would say it was sold in (sort of) good faith but the lack of notice of the bent filter ring and description of a well used lens as "excellent" followed by lack of supplying practical help is not very re-assuring.
Tom |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|