| Предыдущая тема :: Следующая тема |
| Автор |
Сообщение |
Roka
 Зарегистрирован: 18.03.2016 Сообщения: 133 Откуда: Phoenix, AZ
Expire: 2017-04-07
|
 Отправлено: Пн Апр 04, 2016 8:36 pm Заголовок сообщения: Problem disassembling 300mm lens |
|
 Отправлено: Пн Апр 04, 2016 8:36 pm Заголовок сообщения: Problem disassembling 300mm lens |
|
|
Roka wrote:
I've run into a problem attempting my first disassembly and re-greasing. The lens is a Minolta MC Tele Rokkor-HF 300mm f/4.5. I got it disassembled to the where I had to remove 6 body screws. 5 came out but I think I've stripped the head on the 6th one. My only idea was to use my Dremel Tool to try and open the slot a bit. Any other ideas or suggestions?
The lens:
The screw:
 _________________
Camera
Fujifilm X-T20
Lenses
Vivitar 55mm f/2.8 Macro (1:1)
Canon FD 200mm f/4
Canon FD 300mm f/5.6
|
|
| Наверх |
|
 |
Lloydy
 Зарегистрирован: 02.09.2009 Сообщения: 7880 Откуда: Ironbridge. UK.
Expire: 2022-01-01
|
 Отправлено: Пн Апр 04, 2016 9:23 pm Заголовок сообщения: |
|
 Отправлено: Пн Апр 04, 2016 9:23 pm Заголовок сообщения: |
|
|
Lloydy wrote:
the Dremel should be your last resort.
My first option would be - soak the screw in lighter fluid or acetone, there might be thread lock on the screws - if there are traces of white dust on the screws that came out then it's probably thread lock.
Second, get a small electrical soldering iron with a pointed tip and heat the screw. The screw is steel and the lens aluminium and the have a different coefficient of thermal expansion - the screw will expand and the aluminium around it should expand slightly more
Third, and this might help with any attempt to remove the screw, tap the top of the screwdriver before turning it. Maybe sacrifice a screwdriver and make a sharp chisel point on it, tap it into the slot, then use a good screwdriver - maybe tap that in to get it into the 'new slot' - and turn that.
I've sheared the tops of screws in the past, but never failed to get the remains out - eventually _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Наверх |
|
 |
Gerald
 Зарегистрирован: 25.03.2014 Сообщения: 1292 Откуда: Brazil
|
 Отправлено: Вт Апр 05, 2016 12:10 am Заголовок сообщения: |
|
 Отправлено: Вт Апр 05, 2016 12:10 am Заголовок сообщения: |
|
|
Gerald wrote:
In my experience, a hot air gun is much more efficient than a soldering iron. The reason is that a typical soldering iron with fine tip is a low-power heat source.
With a hot air gun, the procedure I usually use is:
1) Cover the screw head with an adhesive tape with a hole slightly larger than the screw head. The adhesive tape is important to protect neaby plastic or rubber parts that could be damaged by hot air.
2) Adjust the hot air temperature to about 250 °C.
3) Heat the screw head for about 30 seconds.
4) Apply acetone on the screw head with a cotton swab.
5) Try to unscrew the screw.
6) If the screw looses, great. If not, repeat steps 3, 4 and 5 until succeed. _________________ If raindrops were perfect lenses, the rainbow did not exist. |
|
| Наверх |
|
 |
Roka
 Зарегистрирован: 18.03.2016 Сообщения: 133 Откуда: Phoenix, AZ
Expire: 2017-04-07
|
 Отправлено: Вт Апр 05, 2016 1:47 am Заголовок сообщения: |
|
 Отправлено: Вт Апр 05, 2016 1:47 am Заголовок сообщения: |
|
|
Roka wrote:
Thank you both for the replies! I'm glad I didn't immediately break out the Dremel Tool as that probably wouldn't have ended well. I don't have either a soldering iron or a heat gun so I just ordered a small heat gun which should arrive on Wednesday. I also have to get some acetone as my wife doesn't do her nails - neither do I. After I get both I'll try again on the screw and let you know how it goes. _________________
Camera
Fujifilm X-T20
Lenses
Vivitar 55mm f/2.8 Macro (1:1)
Canon FD 200mm f/4
Canon FD 300mm f/5.6
|
|
| Наверх |
|
 |
Jiaming
 Зарегистрирован: 09.03.2016 Сообщения: 106
|
 Отправлено: Вт Апр 05, 2016 6:04 am Заголовок сообщения: |
|
 Отправлено: Вт Апр 05, 2016 6:04 am Заголовок сообщения: |
|
|
Jiaming wrote:
There are tiny screw extractors for sale, either on amazon or on ifixit. Do give them a try before you turn to heavy duty machines.
If the screw is already loose, you may try to turn it with a needle or whatever sharp tool that can provide enough friction, slowly. When there is enough length for a pair of tweezers, use a pair of those to remove.
I was once very lucky to be able to remove a dead screw with a needle, but this is unlikely to hold true for every case.
Good luck! |
|
| Наверх |
|
 |
Roka
 Зарегистрирован: 18.03.2016 Сообщения: 133 Откуда: Phoenix, AZ
Expire: 2017-04-07
|
 Отправлено: Вт Апр 05, 2016 6:12 am Заголовок сообщения: |
|
 Отправлено: Вт Апр 05, 2016 6:12 am Заголовок сообщения: |
|
|
Roka wrote:
| Jiaming писал(а): |
There are tiny screw extractors for sale, either on amazon or on ifixit. Do give them a try before you turn to heavy duty machines.
If the screw is already loose, you may try to turn it with a needle or whatever sharp tool that can provide enough friction, slowly. When there is enough length for a pair of tweezers, use a pair of those to remove.
I was once very lucky to be able to remove a dead screw with a needle, but this is unlikely to hold true for every case.
Good luck! |
Unfortunately it's in there tight. That's how I started destroying the head - by turning too hard and having the screwdriver slip - several times. _________________
Camera
Fujifilm X-T20
Lenses
Vivitar 55mm f/2.8 Macro (1:1)
Canon FD 200mm f/4
Canon FD 300mm f/5.6
|
|
| Наверх |
|
 |
Gerald
 Зарегистрирован: 25.03.2014 Сообщения: 1292 Откуда: Brazil
|
 Отправлено: Вт Апр 05, 2016 12:17 pm Заголовок сообщения: |
|
 Отправлено: Вт Апр 05, 2016 12:17 pm Заголовок сообщения: |
|
|
Gerald wrote:
A 10mm heat gun nozzle is ideal, but be sure to protect the plastic parts and paint with a tape or kitchen aluminum foil. You can use a higher temperature, up to about 350 °C (662 °F) for particularly difficult cases. The tip of the screwdriver must have sharp edges to reduce the chance of tip slip and consequently damage of the screw head. If necessary sharpen the screwdriver tip with a sandpaper or a small grinder. The most important thing is to have patience. _________________ If raindrops were perfect lenses, the rainbow did not exist. |
|
| Наверх |
|
 |
|
|
|
Вы не можете создавать новые темы в этом форуме Вы не можете отвечать в темах этого форума Вы не можете редактировать свои сообщения в этом форуме Вы не можете удалять свои сообщения в этом форуме Вы не можете голосовать в опросах этого форума
|