MFlenses — новая жизнь в цифровую эпоху
MFLenses 2026

Форум объективов с ручной фокусировкой

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.

Исследуйте мир старых объективов через заметки о ремонте, реальные тестовые снимки и подробные архивные темы с множеством изображений.
В центре внимания

Место для партнёра на главной странице форума.

Rolleiflex SL35E
Предыдущая тема :: Следующая тема  


Reply





Body was bought recently from eBay for about $20 total. Described as "parts only."

Arrived in near-mint condition. The only thing wrong was a roll of film inside in need of rewinding -- everything works!

The lens came from a recent flea market sale for about $15 and is worn but works fine and is optically clean.

I am pleasantly surprised with this very nice camera -- the last of the SL-series and completely different from the earlier SLs. Electronic metal blade shutter with speeds of 1/1000 to 16 seconds and 1/125 flash sync. Metered Manual or Aperture Priority Auto exposure modes. Aperture and shutter speed visible in finder. Diagonal split image focusing aid. Accepts conventional cable releases. Accepts 2 motor drive accessories. This camera also has a very quiet shutter -- one of the quietest SLRs I've handled.

The body also came with a sliding viewfinder black-out accessory for tripod use which would probably sell for $20 by itself!

The lens I have for it is older and has the first version of the QBM mount without aperture simulation so must be used in stop-down mode with this camera which normally uses the 2nd version of the mount. Not a big deal but I'm now looking for a deal on a later version lens for it.


Reply

A very good buy congrats.


Reply

dof писал(а):
The only thing wrong was a roll of film inside in need of rewinding -- everything works!


the only issue that I've encountered with the 35sl is advancing the film. The sprocket notches tend to jump out of the film holes. So, as a solution, when loading, I secure the leader with a small piece of tape to the tale-up roll. So far, no problems. When rewinding, it's easy to tell when one gets to that last (the first edge) of film. The tape usually stays connected to the roller and not the film, but I don't imagine a problem if it did stay connected to the film.
BTW, excellent lens!!! Very Happy


Reply

^ Thanks for the tip. Very Happy